T4 Wheel alignment settings

[farmsyncro]

Hi all,
We're getting a wheel alignment done and I wanted to confirm values. Does anyone have this information? Plus, do they respond well to a bit of negative camber on the front to improve turn in?
Regards,
Farmsyncro

[rob64981]

Find JETS he should be able to point you in the correct direction.

Rob

[jets]

Find JETS he should be able to pint you in the correct direction.

Rob

I don't drink pints.

This is complicated & I was hoping someone else would respond that could put it quite simply.
There is a change in settings in April 2000 [probably not the only one in the total time the T4 was produced]
Up till this time there are 5 group nos. From 5 .2000 there are 8.
To establish what your group no is you need to look behind the RHS A pillar lining, next to the central electrics, & find the Vehicle Data Sticker. You may need to see an example of the sticker to identify the no you are looking for. It could be after the word Kom.
There are 3 different settings depending on the load state at the time of wheel alignment. Unladen, 1/2 payload & fully laden.
Figures are available for both front & rear axles but I would need year, possibly Vin no. & group no to be any further help.