Above Forum Ad

Collapse

Announcement

Collapse
No announcement yet.

Diff breathers

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Diff breathers

    Hi, wondering if Seikel is the only supplier of extended diff breathers, and where to source it from? Could the cheaper ARB diff breather kit work, or not recommended? How tricky is the installation?

    On another note, I can't figure out from the online EKTA the part number for the rear diff to CV output seals, can anyone help on this?

    Thanks! Sam

  • #2
    Usually, it's just some 1/4" air hose over a nipple of some sort terminated in a motorcycle fuel filter...

    Comment


    • #3
      Originally posted by heyasam View Post
      On another note, I can't figure out from the online EKTA the part number for the rear diff to CV output seals, can anyone help on this?
      I did a search on your previous posts & found you own a T5.1. In the future, when you are after specific info don't forget
      to include your model no.
      Understand how it works, troubleshoot logically BEFORE replacing parts.
      2001 T4 TRAKKA Syncro 2.5TDI,2006 Mk5 2.0TDI Golf manual,2001 Polo 1.4 16V manual [now sold], '09 2.0CR TDI Tiguan manual,
      Numerous Mk1 Golf diesels

      Comment


      • #4
        I'm also keen on finding info on this too. My research hasn't lead my far either. I need to get under the car and find the actual breathers and see what they look like first I reckon.
        2012 T5 LWB 4Motion LIFTED

        Comment


        • #5
          Any updates here?

          2012 132kw T5.1 TDI DSG 4Motion LWB Transporter, locking rear diff. Macron Campervan conversion. ECB bullbar. Milford towbar and rear light protector. Seikel Desert HD 30mm lift kit.

          Comment


          • #6
            Can just extend the existing and make your own. i went to install a generic kit of eBay but decided to go and make my own with larger diameter pipe as the kit was only 4mm. But all you need to do is pop off the rear diff and haldex breather hose caps and join your hose on and run up to engine bay and put some filters on the ends. The transfer case I'm looking at doing soon those were the easiest so did them when I had some spare time. I'll get some instructions to you if you wish?

            Comment

            Working...
            X