Got My Baby Back!

[jueshen]

Hey Guys,

Just thought id let u know

I got my pgti back!! last Friday

Brand new turbo
Took it last Sat for 3” DP
Added BMC Flatbed to my PD 160
And stage 2 FRC Software

Car is AWESOME!!!

[mikepologti]

hahah let the good times roll, you must be seeing a masive differance in the car with those mods from stock.

[Gti Dave]

I bet you're sitting behind the wheel going yeeehaaaaaaa!!!!!!!!!!!!!!!!!!!!!!

[Chipped]

New turbo...being a KO4??

[jueshen]

you guys r right
im loving the car...
its such a pleasure to drive
New turbo is a k03s original ones seals went @ 42000KM when the car was stock!

im going to dyno this weekend...
i should be looking around 130wkw... remember we only have 95 octane fuel available at garages and we not at sea level...

but im very happy with 130 wkw either way lets hope i get those figures... and it is winter

[Stan]

good that it's winter, they love the cold air!
Have fun with your new toy!

[jueshen]

Thanks i will

[jueshen]

hey all,

i had my car put on the dyno this weekend...
i made 171.5 HP and 306 NM ATW...
i think thats good what urll think?

[noone]

Sound like healthy tread-stripping numbers.

How does it feel on the road?

Think some suspension mods might be in order to assist with the traction now you've got all that power...

[jueshen]

car feels great

got enough power down low for day to day driving, when u press harder & take her over 2000 RMP, that’s when it really hits, there is a bit off a spike in torque between 3200 and 3300 RPM that I can feel and see on the dyno graph, apparently that’s when the turbo realizes its boosting at 1 bar… and drops for that little bit then back up to 1 bar again … till around 5000 RPM then down to 0.6 until redline…

I am happy with her, would love a FMIC though…

So according to my calculations 171.5 HP ATW = 128 WKW
Some other calculations say 130 – 131 WKW

And then ATF I calculate 153 KW
Other calculations say 160 – 165 KW

What is it really?

There was a stock Ford Focus (ST) 2.5 T that ran 176 HP ATW which is supposedly 165 KW ATF so I should be close to or more than 160 KW according to that…

[VWindahouse]

Congrats and pleased to hear your loving it! 128kW seems to be the correct figure.

Add a Forge TIP and DV and a really really cold day and your 130kW may happen

What's next?

[jueshen]

Thanks,

i think next would be a FMIC or TIP...

but apparently if i put FMIC i must change BOV as well...

but only around Dec...
looking to buy another house...

[mikepologti]

Thanks,

i think next would be a FMIC or TIP...

but apparently if i put FMIC i must change BOV as well...

but only around Dec...
looking to buy another house...

i would certainly recomend a after market bov/diverter valve. the stock ones really dont handle to well with chipping and other mods.