Adding XFORCE VAREX Muffler to existing HP Exhaust

[RandomX]

Hi All,

Looking to reduce the noise of my exhaust while just driving around town (or around my neighborhood).

Is it feasible to add a XFORCE Varex muffler to my existing Harding Performance Full Exhaust?

It seems the HP exhaust has a diameter of 2.75" however the XFORCE mufflers only come in 2.5" or 3"...

Also the 2.5" model says not for turbo applications, so i gather that's out of the equation... The 3" says off-road or track use only, i'm assuming because of the noise levels in straight through mode...

Anyone have any ideas how i can maintain the existing exhaust performance when giving it a bootful, but quieten it down when cruising?

Cheers,

Josh

[car_nut]

Assuming you do not already have one, suggest a small resonator might do the job without any loss of performance. Worked for my Milltek exhaust which was too loud without a resonator.

A performance exhaust fitter should have a full range of straight through type small resonators. The one I have is for 3" tube and the Milltek tube is 2.75". Can provide a photo, let me know.

Cheers

[RandomX]

thanks for the info : )

i'll take the polo down to genie exhausts (ive used them before in perth) and get their input...

cheers