P3 Gauge

[nomadx38]

Umm I don't doubt what you saw but I read in the manual somwhere that it only displays boost at +/- 13 PSI (or somthing like that so I'm not sure how you got 39. Sure it wasn't displaying boost in KPA?

Also as I have said it reads OBDII data so its not like it makes the stuff up. It reads what the ECU puts out and from what a can see with VCDS using the OBD read mode - both data is the exact same.

[gavs]

P3 Gauge

Boost on our R showed as 39 psi with the ultragauge

analog sensor with P3 was on the money.

I just dont trust the UG (and it looks ****e)

There are 2 different boost settings, one which is higher than it actually is, the other which is the accurate one.

Irrespective of looks, I bought it for a function and for my purpose it works just fine, even though I am generally more style driven than many other people

[polo]

Not sure if this has been covered before but for gauges I use the ELM 327 OBD-II reader (eBay $10-$20) and the Torque app on the Samsung S4 - looks good and response times are very acceptable. Very cheap but effective solution.

[LunchboxVRS]

Has anyone got the fiscon basic-plus from kufatec? Says its compatable but would be hessatent to try it first. And I don't need the bluetooth.
It says its red screen only but shows a picture of it on white MDF.

FISCON Bluetooth Handsfree - "Basic-Plus" - VW, Skoda-36496_M

[nomadx38]

^that looks really cool. Shame I only have the basic MFD which has a pre set LCD

[gavs]

P3 Gauge

As far as I know, the E-MFA add on doesn't work due to the OBD/CANBUS setup on the polo.

[GTI6R]

ultra gauge ordered.. just received my tracking number should be here on Monday

[TorqueSteer]

P3 Gauge

ultra gauge ordered.. just received my tracking number should be here on Monday

I'm so jealous lol ill get mine soon as well tell me how it is and how it works and all keep me posted if u don't mind .

[GTI6R]

P3 Gauge

Yeh no worries I will give you guys a review when I get it early next week

[GTI6R]

Got the ultra gauge and it seems to be pretty good.. Value for money if you ask me heaps of gauges to chose from
Gav what gauge do you use for boost? I'm using the boost pressure psi gauge does anyone know what boost the cars are meant to run in a gti? My car seems to vary from 16 pound to 20 pound and I can't seem to find anything to be sure

[kevinctr]

Anything out there other than VCDS displays EGT?

[nomadx38]

EGT? If you mean exhaust temp then yeah UltraGauge should do something close to it as you can read the O2 sensors pre and after the cat. I would assume you could pull temp data from the sensor.

[kevinctr]

EGT? If you mean exhaust temp then yeah UltraGauge should do something close to it as you can read the O2 sensors pre and after the cat. I would assume you could pull temp data from the sensor.

Could you take a photo showing the Exhaust temp on ur UltraGauge? IS yours a Polo GTI? Thanks

[kar2390]

Not sure if this has been covered before but for gauges I use the ELM 327 OBD-II reader (eBay $10-$20) and the Torque app on the Samsung S4 - looks good and response times are very acceptable. Very cheap but effective solution.

+1 I've got the same setup



Sent from my Nexus 5 using Tapatalk

[kar2390]

+1 I've got the same setup



Sent from my Nexus 5 using Tapatalk

Would this be legal to use while driving in Victoria if its secured in a phone cradle?