If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed, registering will remove the in post advertisements. To start viewing messages,
select the forum that you want to visit from the selection below.
This means you should apply for your renewal now to avoid any disruptions to your membership whilst the renewal process is taking place! NOTE: If you have an auto renewing subscription this will happen automatically.
I haven't worked on any polos yet so maybe someone else could verify. But i believe on the 1.6 it will be on the front facing of the engine, facing downwards to the ground. On the 1.4 it should be on the front left of the engine, above the alternator, it is on the audi a1 with the 1.4 anyway. And the 1.2 is in that spot previously described but it will be a paper element filter so will have a black plastic cover on it.
Was it where i suggested? like i said i haven't worked on any but i know the engine orientation is the same for the audi and volkswagen, so i can only assume it would be there also. You can use a claw type filter tool on it or there is the cup type filter tools which i prefer. It should be a small black tin type filter if its oem type filter, be careful when you remove it as there may be a black plastic basket thing on the bottom which is spring loaded and if you are unaware and throw the filter down the spring has a tendency to shoot the basket off.
Tweet
Comment