Arteon VCDS / OBDEleven Tweaks - Confirmed working

[capuman]

Sounds like its faulty then (assuming its correctly plugged in.. i hear some people here say they needed some sort of an extension to plug it in, i didnt need it though).

[Mrkglstn]

Na no red lights when I plug it in....tried switching ignition on and having the car started ��

[capuman]

Do you see a red light on the device when you plug it in? As soon as you do, you should see a blinking red light. If you dont thwn its either faulty or not plugged in properly. I dont have to force it at all so dont do it too hard or you might damage the pins.

[Mrkglstn]

Hey guys....OBD came today and picked up my Arteon Monday....I can’t get the app to connect to the device. I have pushed it as hard as I can into the slot as someone earlier advised but still no joy.....am I missing something / I got a faulty OBDEleven?

[LRDV8R]

IDE11714-ENG126830-Ambient light color list-Blauwert Farbe = 64
IDE11714-ENG126829-Ambient light color list-Gruenwert Farbe = 255
IDE11714-ENG126828-Ambient light color list-Rotwert Farbe = 175

Ignore the exact ENG codes - just put the numbers in the slot you want the factory white to be in.

Thanks for this DreamensioN- got white back on the board!

[capuman]

LOL! Even with 10 colours, I only really use about 5.

How do I get 20? LOL

even at 10, it does not show all the colours properly anyway so i cant imagine that much of an improvement with 20

[DreamensioN]

On that note, I'm not sure if anybody else has covered this, but theres an additional adaptation for more colours than 10!

20+ colours, anyone?

[ATTACH=CONFIG]34301[/ATTACH]

LOL! Even with 10 colours, I only really use about 5.

How do I get 20? LOL

[heavyj251]

On that note, I'm not sure if anybody else has covered this, but theres an additional adaptation for more colours than 10!

20+ colours, anyone?

[DreamensioN]

Anyone got the original values for the factory white LED’s (background lighting)

I'm in the same boat!

IDE11714-ENG126830-Ambient light color list-Blauwert Farbe = 64
IDE11714-ENG126829-Ambient light color list-Gruenwert Farbe = 255
IDE11714-ENG126828-Ambient light color list-Rotwert Farbe = 175

Ignore the exact ENG codes - just put the numbers in the slot you want the factory white to be in.

[heavyj251]

I'm in the same boat! Except 255,255,255 for me is purple-ish... I've played with a few values but can't get it quite right

If anybody could post the original value for 'white', I'd also be most appreciative!

[LRDV8R]

Anyone got the original values for the factory white LED’s (background lighting) - I changed to 10 colour values but mucked around with a few ‘custom colours’ but now can’t get white back (always has a green tinge). I didn’t bother recording it believing that RGB at full value each normally delivers white..but not here!

[HiddenTaco]

Oh right, i see. I wanted to adjust the volume basically. Thanks

Up or down?

I was curious if it could be increased because I find it hard to hear where the revs are at. Being already at 100% I didn't mess with it but I assume the % can be decreased if that is what you want.

[capuman]

Oh right, i see. I wanted to adjust the volume basically. Thanks

[HiddenTaco]

What did you want to do with the soundaktor?

It's set to 100% but only comes on when in Sport mode. If you want Sport mode without the Soundaktor then make a Custom profile.

[capuman]

Weird, when i click on the soundaktor in the apps it keeps telling me to make sure the engine is running, which it is... So i cant get it to work on obdeleven. What about you guys?