Above Forum Ad

Collapse

Announcement

Collapse
No announcement yet.

Tiguan Quirks

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • #31
    Originally posted by MGV View Post
    The novelty of the MFD still hasn't worn off, i'm usually scrolling around, checking the statistics... Anyways, after about a month of ownership, (about 2 months ago) i discovered by accident that hitting the 'OK' button when average fuel consumption is diplayed, an overall average is displayed (with a little '2' at the top-right). Today, it reset itself, or i reset it inadvertantly somehow... Can anyone elaborate? Thanks
    some of the data on the MFD has two values that you can toggle between. MFD shows a "1" or a "2" in the top right like you have found.
    When it is in the "1" mode the data is automatically reset when you leave the car for about 30 minutes or so (might even be up to an hour) and then drive it again. When it is set to "2" mode this data remains until YOU reset it by holding down the "OK" button for a few seconds.
    This is probably what you have done to accidentally reset it.
    In my cars the "2" mode has been left since i bought the cars so that i can see data averages for the cars life etc.
    Having said that it would actually be useful to have a third mode so that you could reset this one for long trips etc... but that's just my opinion.
    1974 1300 Beetle, 1997 Golf GL, 2003 New Beetle Cabrio, 2014 Audi A4 quattro

    Comment


    • #32
      Thanks for that, i guess that's what i did... I know it was on 9.7 after around 4500ish, the day before...
      Cheers.
      Current: MY18 TRANSPORTER CrewVan, Indium Grey
      Previous: MY10 Tiguan 2.0TSI, Silver Leaf, APR StgII tune + many mod's

      Comment

      Working...
      X