VW Golf 7 Clubsport S rear muffler

[Giskard]

I’d like to buy one of these for my 7.5 GTI.

https://cars245.com/en/item/audi-volkswagen-5G6253609DD-rear-silencer/

My questions are, is the diameter of the Clubsport S muffler compatible with the 7.5 GTI? Also, is it reasonable simple for the original muffler to be unbolted/unclamped or does it need to be cut from the exhaust system.

Apologies if if this has been covered before. Thanks in advance.

[peekay34]

Hi I got one of these fitted today to my GTI MK7 PP 2015 you need a special joiner clamp as well. It costs around 660 AUD to buy one in AUS I would buy it here not from overseas as the shippings is prohibitive. I will probably get the resonator as well. As if will fit your 7.5 I don't see why not.... I may get the resonator down the track as well. Part nos are 5G6253609DD and 1K0253141AA .

[peekay34]

660 plus the price of the clamp BTW

[Giskard]

Hi peekay. Apparently the 7.5 rear valence openings are a different width. So I think I’m out of luck. ;(

[peekay34]

Cant you just get the tips modified to fit? They are just Tips?

[Bladesg]

Hi I got one of these fitted today to my GTI MK7 PP 2015 you need a special joiner clamp as well. It costs around 660 AUD to buy one in AUS I would buy it here not from overseas as the shippings is prohibitive. I will probably get the resonator as well. As if will fit your 7.5 I don't see why not.... I may get the resonator down the track as well. Part nos are 5G6253609DD and 1K0253141AA .

Where in Australia did you get yours? Does the original pipe need to be cut or is it just a clamp undo and do up job?

[peekay34]

I got mine from a VW Dealer its a cut and then use 1K0253141AA Clamp with the muffler. Easy by an exhaust shop. On the existing pipe there is a cut mark exactly where you should cut. The exhaust shop I went to new exactly where it was. Took them like 25 mins to do .

[adcha1]

Hi All,

What is the difference between the VW Golf 7 Clubsport S rear muffler and the standard 7.5 GTI muffler?

Thanks

[Bladesg]

I got mine from a VW Dealer its a cut and then use 1K0253141AA Clamp with the muffler. Easy by an exhaust shop. On the existing pipe there is a cut mark exactly where you should cut. The exhaust shop I went to new exactly where it was. Took them like 25 mins to do .

cheers

[peekay34]

YouTube video of exhaust differences and YouTube