Need advise / help in fixing negative camber issue

[buzuki]

If you shock a corner hard enough, the subframe can walk on its mounts (has elongated holes for adjustment) - certainly I would be starting there if the car has never been pranged.

Yeah. There is some movement available in the cradle mounts. Your best bet would be get some fresh cradle bolts, take it to a wheel aligner, tell them to centre the cradle to try and give even camber both sides, and see what the result is. There would be a few mm of movement available.

[magbane]

Hmmm, might talk to the alignment about this, willing to try anything that might get me fixed on this as cheaply as possible.
Ok, I Take it i would get the bolts from VW?

[magbane]

Hello all, Just a quick note to say that this issue has FINALLY been resolved! Unfortunately with a lot of faffing about and costing me a new set of tyres cause of a miss-alignment wrecked my tyres ,but however, they are now Goodyear F1 Asymmetrics 2s!!!
Pretty sure Corey will be happy to here this, since he kinda likes these, only a little mind you
I might write a short story about my whole experience with this on another post that hopefully might entertain or shock some members.

[iampivot]

Just a quick question; did this issue cause your car to have hints of soft steering, with a bit of lateral dead play in the steering wheel?

[brad]

what was the fix?