Tweet
Hi all,
Firstly, apologies for the crosspost, but I wanted to make this opportunity available to everyone for whom this is suitable.
I suspect many of you already follow with interest vert1's thread over on VWVortex in which he details the build of his Mk4 Bora R32 Coupe:
VWVortex.com - MK4 Bora R32 Coupe
If you're a close follower, you'd have seen that one of the mods that John has made to the car is the addition of a rear chassis brace, very similar to the old TST Brace (now sold as a Unibrace, I have one of these in my car, the difference is makes is remarkable - the whole rear end of the car feels tighter, there's no creaking as the chassis flexes, and handling is a lot more reliable and predictable.
John has decided to make a run of braces to suit various VW vehilcles (Mk5 Golf and Jetta included), and I have asked him if he'd be interested in distributing to Australia, and the answer was affirmative.
So, at present, I'm trying to establish what level of interest there would be from Australian buyers. I'm aiming for a price of AUD$400 plus shipping from Sydney (if you're in Sydney, pickup would be free), plus another $50 or so if you need the nutsert tool (it makes installation a shedload easier).
If you're interested, let me know by PM.
Rob
---------- Post added 27-11-2011 at 09:48 PM ---------- Previous post was 25-11-2011 at 09:58 AM ----------
The graphic can be varied from the .:R logo as required for the batch that we order, as can the colour I believe.
Firstly, apologies for the crosspost, but I wanted to make this opportunity available to everyone for whom this is suitable.
I suspect many of you already follow with interest vert1's thread over on VWVortex in which he details the build of his Mk4 Bora R32 Coupe:
VWVortex.com - MK4 Bora R32 Coupe
If you're a close follower, you'd have seen that one of the mods that John has made to the car is the addition of a rear chassis brace, very similar to the old TST Brace (now sold as a Unibrace, I have one of these in my car, the difference is makes is remarkable - the whole rear end of the car feels tighter, there's no creaking as the chassis flexes, and handling is a lot more reliable and predictable.
John has decided to make a run of braces to suit various VW vehilcles (Mk5 Golf and Jetta included), and I have asked him if he'd be interested in distributing to Australia, and the answer was affirmative.
So, at present, I'm trying to establish what level of interest there would be from Australian buyers. I'm aiming for a price of AUD$400 plus shipping from Sydney (if you're in Sydney, pickup would be free), plus another $50 or so if you need the nutsert tool (it makes installation a shedload easier).
If you're interested, let me know by PM.
Rob
---------- Post added 27-11-2011 at 09:48 PM ---------- Previous post was 25-11-2011 at 09:58 AM ----------
The graphic can be varied from the .:R logo as required for the batch that we order, as can the colour I believe.