Above Forum Ad

Collapse

Announcement

Collapse
1 of 2 < >

Email Notifications Failing (mostly Telstra)

Hello everyone. Seems there is an issue with Telstra (possible others) blocking email from our server. If you are trying to sign up I would suggest a different email if possible. If you're trying to reset your password and it fails please use the Contact Us page:
Contact Us - VWWatercooled Australia
https://www.vwwatercooled.com/contact-us
Contact Us
2 of 2 < >

Welcome to the new look VWWatercooled

After much work and little sleep there is a new version of the forums running on more powerful and recent hardware as well as an upgraded software platform.

Things are mostly the same, but some things are a little different. We will be learning together, so please post questions (and answers if you've worked things out) in the help thread.

New Forum Server and Software - VWWatercooled Australia
https://www.vwwatercooled.com/forum/first-stop/forum-rules-how-to-post/2037513-new-forum-server-and-software
The new forum software is an upgraded version of what came before, it's mostly the same but also a little different. Hopefully easier to use and more stable than before. We are learning together here, so please be patient. If you have questions, please post them here. If you have worked something out and can provide an answer,
See more
See less

CAN BUS upgrade installation TROUBLES

Collapse
X
Collapse
 
  • Page of 1
  • Filter
  • Time
  • Show
Clear All
new posts
Previous template Next
  • #1

    CAN BUS upgrade installation TROUBLES

    Greetings all, I installed the can bus gateway as given on my-gti.com and when I tried to recode it using Vag Com it says "Error 22 Coding Rejected ,Conditions Not Correct or Request Sequence Error" If I run a faults scan, the options which I tried re-coding in can bus on Vag Com say " status: not registered 0001"

    I have a '06 2.0 Golf TDI DSG with the useless RCD-300 and wanted to install the RCD-310 which required the can bus gateway upgrade.

    Could anyone please help! Thanks in advance.
    Tags: None
  • #2
    I would double check you have all of the correct settings from the old can-bus correct first - when I did mine I got a weird error because I missed a function.

    Good luck.

    Comment

    • #3
      Originally posted by Voora1ZN View Post
      Greetings all, I installed the can bus gateway as given on my-gti.com and when I tried to recode it using Vag Com it says "Error 22 Coding Rejected ,Conditions Not Correct or Request Sequence Error" If I run a faults scan, the options which I tried re-coding in can bus on Vag Com say " status: not registered 0001"

      I have a '06 2.0 Golf TDI DSG with the useless RCD-300 and wanted to install the RCD-310 which required the can bus gateway upgrade.

      Could anyone please help! Thanks in advance.
      Enter a workshop code and it'll allow you to complete the job. Look at the convenience controller for an example or just enter

      12345
      123
      12345

      or similar.
      website: www.my-gti.com

      Comment

      • #4
        Seems to be a case of my bad luck. I swopped a gateway out of a mates car and done the upgrade no worries as per my-gti.com The place I bought it from will send me a replacement unit. Happy days again guys. Thanks.

        Comment

        Previous template Next

        2025 - Below Forum

        Collapse
        Working...
        X