Above Forum Ad

Collapse

Announcement

Collapse
No announcement yet.

Bluetooth not working with RNS510

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Bluetooth not working with RNS510

    Dear All,

    I pulled out my original HU and replaced it with the RNS510 revision A.

    RNS510 works without a problem but I seem to have two issues:

    1) If I unlock the car, all doors unlock with an initial press of the remote (previously one press for driver's door; subsequent press unlocks all other doors)

    2) The 'Egotalk' bluetooth unit that worked with the original HU won't play sound through the stereo speakers. It broadcasts and my phone connects, the buttons on the steering wheel work, just no sound through the stereo and it won't mute when the phone rings. Whether I press the phone button on the unit to mute the radio, I still can't hear the phone nor can the caller hear me so the Mic isn't being engaged either.

    I have upgraded the firmware from 1020 to 1180 and now 2660 but no difference.

    Any suggestions (besides getting a better bluetooth unit...:emo_bagh)

    Cheers,

    Paulo not Pollo!

  • #2
    Have you vagcom'd the car? (enable the canbus system to recognise the RNS). You will not gain all the features of the RNS until the Vagcom is run and certain "box3es" selected.

    Check Mavericks site http://www.my-gti.com/

    Search there...should be a lot of info on the upgrade issue for the RNS.
    MY16 Touareg 4.2Lt V8 TDI/Pure White LED lightbox/REDARC Brake Controller/ Racechip/iDrive Throttle controller
    2008 GOLF .:R32/5DR DBPE DSG/SUNROOF/RNS510/PRIVACY TINT/CONTI SC3s/MILLTEK CATBACK NON-RES/9W2 BT/"MYR-032"

    Comment

    Working...