Above Forum Ad

Collapse

Announcement

Collapse
No announcement yet.

Bushes & rubbers for MK4 Golf 1.6L

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Bushes & rubbers for MK4 Golf 1.6L

    Hey all, as it reads I need to get myself some new front (lower bushes I guess) and top rubber mounts for the struts..........running eibach coils and Bilstein shocks/struts..........

    I've seen a few talking about germanparts.com but aint sure bout it all.......
    1999 MK4 GOLF 1.6L / MY12 TIGUAN 118TSI

  • #2
    Might want to be careful with GermanAutoParts.

    Sent me the wrong bushes for the Golf.
    -DIDZ

    sigpic

    Comment


    • #3
      bushes.....

      where has everyone else got them from ??? Are they hard to replace ??
      1999 MK4 GOLF 1.6L / MY12 TIGUAN 118TSI

      Comment


      • #4
        Here's some top mounts with bearings for under $60.




        Snowy

        Comment


        • #5
          ECS Tuning has some pretty good Control Arm Kits here:




          Snowy

          Comment


          • #6
            I've got some originals I purchased from VW when doing my suspension ~6months ago.

            You can have them for $100 (Upper strut mounts and bearings)

            Comment


            • #7
              thanks fro that snowy, these ones below, would they be the ones I'd be looking for ?? would it be worth changing the dog bone one ? I know I had read in 99gti's thread he had changed on one half or something (that what was recomended to him) but not sure if would be worth on a 1.6L as it's main difrnce was power to wheels was increased ...........



              Last edited by golfaki; 27-07-2008, 08:48 PM. Reason: adding picture
              1999 MK4 GOLF 1.6L / MY12 TIGUAN 118TSI

              Comment


              • #8
                top rubbers and bearings

                Thanks but since posting originally I had (what I thought was the top rubbers) the top rubber issue.........I had my bilstein's installed and in turns out (after visiting suspension city prt melb) that the tools who originally done them installed the left strut hat upside down and when turning the coil was moving with the hat..................anyways that is all good now but upon further inspection of the bushes, they are starting to split.............

                Originally posted by SoVeReIgN View Post
                I've got some originals I purchased from VW when doing my suspension ~6months ago.

                You can have them for $100 (Upper strut mounts and bearings)
                1999 MK4 GOLF 1.6L / MY12 TIGUAN 118TSI

                Comment


                • #9
                  I'd probably go with this kit. The rear bushes in this kit are from the R32 or TT so they are Heavier duty but not as solid/harsh as the full urethane ones.



                  Not sure if you'd get a lot of benefit changing the dog bone as well with the 1.6L, but you might if it's soft/stuffed, it might help your gear changes feel more positive. You'd have to be the judge, but the stock one in my GTI was fine and I only changed it to the APR one when the engine was modded for more power.

                  Some of the other guys might give you better advice on that point.

                  Snowy.
                  Last edited by No457 Snowy; 27-07-2008, 10:52 PM.

                  Comment


                  • #10
                    Originally posted by No457 Snowy View Post
                    I'd probably go with this kit. The rear bushes in this kit are from the R32 or TT so they are Heavier duty but not as solid/harsh as the full urethane ones.



                    Not sure if you'd get a lot of benefit changing the dog bone as well with the 1.6L, but you might if it's soft/stuffed, it might help your gear changes feel more positive. You'd have to be the judge, but the stock one in my GTI was fine and I only changed it to the APR one when the engine was modded for more power.

                    Some of the other guys might give you better advice on that point.

                    Snowy.
                    Thanks for that, I was kind thinking that also after reading up on a few other peoples advise, so yeah I think I will go for that kit...................thanks heaps again!!!!!
                    1999 MK4 GOLF 1.6L / MY12 TIGUAN 118TSI

                    Comment


                    • #11
                      front LCA bushes (red ones)....help !!!

                      Hey guys just doin the bush install, can anyone tell me which way the front (red) bushes go in ? one side has a thicker wall than the other ???

                      does the thick side face the front of the car ? or the other way around ??


                      All done now ............great result too!!
                      Last edited by golfaki; 03-08-2008, 09:35 AM. Reason: question answered........
                      1999 MK4 GOLF 1.6L / MY12 TIGUAN 118TSI

                      Comment


                      • #12
                        Old bushes removed

                        just thought I would put a some pics of the reason I replaced these ..........





                        1999 MK4 GOLF 1.6L / MY12 TIGUAN 118TSI

                        Comment

                        Working...
                        X