Tweet
Done anything about your gearbox? Priced it up with a shop? I've gotta do mine soon but scared to get a quote haha. Also, got any links to decent lsd and fork upgrades? Clean looking r32 mate. Cheers
-
CURRENT: DBP Mk4 Golf .:R34 no. 187 (WOOKY)
Mods: C2 Motorsport Custom Tune | 268/264 schrick cams | Eurospecsport forged rods | JE forged pistons | Miltec Headers back | Higher compression | Engine fully ported | polished balanced crank | Sach Motorsport clutch | Single mass flywheel | Wavetrack LSD | Shortened 4th/5th/6th | etc etc | -
Hey! Yeah, I've had a few quotes from a couple of different workshops around Sydney; most are quoting around the low $3,000 mark including labor so it isn't too bad I guess but mate, get it done before you start to wreck gears! And in terms of LSD, either go for a peloquin or wavetrack and USP Motorsports sell selector fork upgrade kits made of steel instead of brass, which is a worthwhile upgrade.Originally posted by Swainey32 View PostComment
-
Good news for me was it was a belt that made a whinning noise on acceleration/deceleration which went away when clutch was in and not the dreaded gearbox drop
so only about $350 fixed!
CURRENT: DBP Mk4 Golf .:R34 no. 187 (WOOKY)
Mods: C2 Motorsport Custom Tune | 268/264 schrick cams | Eurospecsport forged rods | JE forged pistons | Miltec Headers back | Higher compression | Engine fully ported | polished balanced crank | Sach Motorsport clutch | Single mass flywheel | Wavetrack LSD | Shortened 4th/5th/6th | etc etc |Comment
-
Oh thats sick! Hopefully mine is the same situation because I am not keen on forking out thousands just yet!Comment
-
Haven't done much recently but have bought another cupra lip (other got destroyed) which I'm yet to install, had a headlight lens break, and discovered a flat spot on one of my tyres - very annoying to listen to. Need to upgrade my speakers as the rears dont work at all and I should be getting the gearbox rebuilt sometime very soon. Enough rambling, here's some pr0n:
Comment
-
Can I ask where you got your Cupra lip from? I've had no luck trying to get hold of one myself.Using TapatalkComment
-
I managed to snag this one off a fellow forum member but they're easily available off eBay and ECS tuning - shipping is just the major cost dude.Comment
-
Originally posted by drucejnr View PostHaven't done much recently but have bought another cupra lip (other got destroyed) which I'm yet to install, had a headlight lens break, and discovered a flat spot on one of my tyres - very annoying to listen to. Need to upgrade my speakers as the rears dont work at all and I should be getting the gearbox rebuilt sometime very soon. Enough rambling, here's some pr0n:
Bro this is amazing
Comment
-
It's the shipping I'm trying to avoid, hence I was hoping you could point me in the direction of a local supplier.Originally posted by drucejnr View Post
Thanks anyway.
Sent from my Nexus 9 using TapatalkUsing TapatalkComment
-
So I took the Wookie out for what may be the last drive it'll get in a long time, yesterday. The gearbox is getting worse and worse every time I hop in and theres little things here and there that need attending badly. Roof lining needs doing, need to replace the headlights (drivers internals are rooted, lens cracked on pass side), interior trim pieces are on their way out, need a new center console and the list sadly goes on. Here's a few rollers of what could potentially be its final drive for the year.
Comment
-
So after much debating and my personal situation at home, I decided the Wookie is staying in my possession, I mean, how could I possible get rid of such a beauty of a car? Plus, I've since sold my S3 and need this running again asap lol.
A couple of weeks ago I got stuck into the R32, took the seats out, gave the interior a good clean and removed all the soft touch rubber stuff which was peeling.
Dirty af interior - was a mission to clean but I havent taken after shots just yet
The cat came and helped too
During a hail storm late last year the rain tray developed a hole in it so out with the old
and in with the new
At the moment things are going quite slowly but I'll soon reinstall the rest of the interior, then its time to order some goodies from the US and get this machine re-rego'd and back on the road again!Comment
-
Giiiiiiiiiiiiiiiiiiiiiiiinnnnnnnnnnnnnnnnnnnnnoooo ooooooooo baby!Comment
-
how did you goo with removing the soft touch ? did you paint it afterwards ?Comment
-
I used a green scourer (green side of a dish sponge) and some rubbing alcohol to remove all the soft touch. Left it as is because the plastic underneath is smoothComment
-
So a couple of weeks back I was scrolling through Facebook and came across a post about the "02m shim fix" which basically stated my gearbox problem and a permanent fix for it for only $20 from the dealership. So I did some more research and ordered the parts. Got the parts last week and over the weekend I decided I'd give it a crack, along with some other bits and pieces.
Reinstalled the front seats but now have an airbag fault and I broke my new centre console lol, so need another one of those again.
Got under the car, took off the black inspection cap on my gearbox only to be blessed with this...
So my input shaft bearing is in fact cactus, which means its time for a rebuild and to finally get this thing on the road.
Car goes to the mechanic on Tuesday for a gearbox rebuild, new wheel bearings, rotors and a long overdue service (because I'm a lazy **** lol)
Anyway, heres some porn before she goes away for a little bit
Comment
Comment