lug nuts

[kdog]

Just wanting to know how tight should the bolts be? Tight enough to be undone by hand?

[dylan8]

well mk4s have bolts not nuts.
Iv always done mine by hand.
rattle gun on the FT setting is also good if youhave a breaker bar to remove them later

[Guest001]

90Ft lb on a Passat with Mags

[QBDentFree]

If you get stuck on the side of the freeway with a flat you'll want to be able to get them off by hand.

Even in a body shop I usually finish doing them up with a wheel brace, rather than over tighten with a rattle gun so noone can ever get them off again

[kdog]

well mk4s have bolts not nuts.
Iv always done mine by hand.
rattle gun on the FT setting is also good if youhave a breaker bar to remove them later

Ohk, cause i was applying plasti dip on my rims and got the back ones off but the front wheels seem to be stuck. I used a rattle gun as well but still didn't work, which got me to think about how tight bolts should be, i guess them being unable to come off is too tight ...

[wai]

The owners manual should have it listed there. Then you will need to invest in a simple (pointer type) torque wrench and add it to your tool kit