If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed, registering will remove the in post advertisements. To start viewing messages,
select the forum that you want to visit from the selection below.
This means you should apply for your renewal now to avoid any disruptions to your membership whilst the renewal process is taking place! NOTE: If you have an auto renewing subscription this will happen automatically.
Finally bought the stuff for my car and its all on its way! I have a whiteline rear sway bar, Megan Racing C-pillar race, FK Angel eye projector headlights and KW Coilovers coming! Will post pics once all is installed!
Finally bought the stuff for my car and its all on its way! I have a whiteline rear sway bar, Megan Racing C-pillar race, FK Angel eye projector headlights and KW Coilovers coming! Will post pics once all is installed!
no no no cancel the fk angle lights they are crap im not kidding you will buy globes for the rings every 5 min
VW: it aint just a car, its a way of life There are few things more satisfying in life than finding a solution to a problem and implementing it
My Blog: tinkererstales.blogspot.com.au
ive tried opening mine up and ARRGGGHHHHH,,,mine have the glue around the housing to glass,not the clip style as some of the DIY photos on the web.ive even resorted to "baking" them for 15 min to soften the glue,but no chance...even heater gun... any ideas how urs are? or how you will open them up??
ive tried opening mine up and ARRGGGHHHHH,,,mine have the glue around the housing to glass,not the clip style as some of the DIY photos on the web.ive even resorted to "baking" them for 15 min to soften the glue,but no chance...even heater gun... any ideas how urs are? or how you will open them up??
i tried to do it to my fk lights, but also no chance, mmmmmmmm i want the hella ones dont care what they cost
you will need 2x headlight sets
1 to break and the other for parts
i was discussing this on the UK forums and they have the same style headlights as us.
the only way that most people found to take them apart was a dremel to cut around the plastic where the glass sits into. use a heatgun/flat head to get it off with a 80% change of smashing or cracking the glass too apparently. otherwise they are virtually impossible to get apart.
biggest thing to remember when you buy lights from o/s (esp ebay) make sure you can flip the projector if they do have projectors for RHD, or buy from Ebay UK otherwise you could end up with LHD headlights!
biggest thing to remember when you buy lights from o/s (esp ebay) make sure you can flip the projector if they do have projectors for RHD, or buy from Ebay UK otherwise you could end up with LHD headlights!
Yeah i made sure they are switchable to RHD. Someone i know went off and bought the LHD ones hahahaha.
Comment