4motion haldex modification ?

[qsilverza]

Dre, unless im wrong they are referring to the second generation Haldex controller which isn't compatible with the 4motion Bora's. I do believe it is compatible with the R32's. MIV and V.

[qsilverza]

Doesn't work like that. 95 % or more is transferred to the Front. When you loose traction the Haldex valve actuates and transfers power to the rear. So by pulling the fuse you could remove AWD and be left with FWD.

While on the whole 4WD subject, is there any way to convert a 4motion into a rear wheel drive by simply pulling a plug or a fuse or something similar?

[Bora Sport]

I am interested depending upon final cost.

[dre211]

Dre, unless im wrong they are referring to the second generation Haldex controller which isn't compatible with the 4motion Bora's. I do believe it is compatible with the R32's. MIV and V.

yeh now that you mention it they did say that its the second generation controller but they also said that it should be compatible with newer boras, post 2002 or 2003 something like that. Are you sure that none of the boras are compatible?

[qsilverza]

Not sure, that's just what I had been told. So I guess it is possible. But I had asked for Gen 1 and 2 controllers.

So depending on who we go through they should be able to tell you if it will work or not.

[nashan]

http://www.goapr.com.au/products/haldex.html

and yes it does work on the boras. Im looking into getting one soon. Good luck!