Rally spec

[ScienceVR6]

Pics or ban

pics are comming.

Don't mind the car, its dirty.

[ScienceVR6]

2 broken lights. note tow hook and 100w lights on bar.


again, nice hook.


photo


just a pic from the rear.


mudflaps!


mudflaps?

[MattyT]

Needs more of the large circular floodlights. At least 4 of em in a moulded fibreglass shroud.

[Golf Houso]

That has to be, the most offensive looking Golf III I've ever seen...

Good work!!!

[ScienceVR6]

You have to put on of those triangular TOW stickers on it....

yeah, i forgot to get one while i was at revolution racegear.


Mudflaps are on.
My god, it looks so tough now!
the front ones are about an inch from the ground when parked, 300mm wide, and bright red!
the rears are a bit smaller, and not as low.

I'll wash the car during the week, and take some pics.

I'll also get rid of the black head light surrounds, and the cups where the other lights should be.

[Pullstarter]

Hella Rallye 2000's FTW!!

[bombsquad21]

Rally cars don't have sound systems..may I suggest a Clarion sticker delete??
Car is looking great though!!

You could also drop any of the fog light mounting screws or bolts etc in some acid to give them a nice fresh silver shine!

[ScienceVR6]

Rally cars don't have sound systems..may I suggest a Clarion sticker delete??
Car is looking great though!!

You could also drop any of the fog light mounting screws or bolts etc in some acid to give them a nice fresh silver shine!

one of the screen savers on the head deck shows the clarion sponsered peugot rally car in full flight.

Blew out a tire yesterday, so had to buy a cheapy. Bob jane's Xenon!

When that dies, i'm going to go to a taller tire, and standard hight springs.

I'm thinking of using a 196/60 15 for an all out rally look, without buying $238 yokohama rally tires (which only come in a 185/60 r 15 anyway)

Has anyone ever fitted such a tall tire on one of these?
I know the speedo will be out.
I know i might rub.
But i will be on standard springs, at standard hight.

[ScienceVR6]

stripped the interior out today, all the back half.

No more subbie, no boot install, no rear seats, no pannels.

I'm going to make a thin faulse floor to cover the spare tire well, and under seat space. Just a 3mm ply, painted black. I'm also repalcing the rear door trims with 3mm ply, painted black. I will get a full size spare, on a steel mk4 rim, or if i can get one, a color concpt alloy, painted black.

I will then mount a fire extinguisure just behind the front seats, where the back seat would have been.

[bboyskidz]

pics or BAN BAN BAN!!!!!

[ScienceVR6]

no pics, but more mods!

Got the exhaust modded today, gone are the twin 2.5" rolled lip chrome tips, in favour of a single 3" mild steel tip, painted black. Its the toughest looking tip i have ever seen. IMHO.

What do you recon a Half cage is worth?

Got a quote today. for a 4 point half cage, in 2" mild steel, bent, and supplyed, but not fitted, Is $150. I would have to weld feet to the tubes so i could bolt it down, and use Scafold joiners where the top hoop meets the rear bars, to make the cage removable.

[MattyT]

Mild steel will weigh A TON and isnt that strong. Real cages are Chromoly. Do it.

[ScienceVR6]

Mild steel will weigh A TON and isnt that strong. Real cages are Chromoly. Do it.

put it this way, $150 vs $850

[DubSteve]

put it this way, $150 vs $850

Don't be a pussy do it right do it once!

[MattyT]

^^^ What he said.