Tweet
I had a cracked CV boot so I bought a replacement. Got the axle out of the hub but I don't know how to get the boot over the end of the axle, any ideas?
1 of 2
Email Notifications Failing (mostly Telstra)
Hello everyone. Seems there is an issue with Telstra (possible others) blocking email from our server. If you are trying to sign up I would suggest a different email if possible. If you're trying to reset your password and it fails please use the Contact Us page:
2 of 2
Welcome to the new look VWWatercooled
After much work and little sleep there is a new version of the forums running on more powerful and recent hardware as well as an upgraded software platform.
Things are mostly the same, but some things are a little different. We will be learning together, so please post questions (and answers if you've worked things out) in the help thread.
Things are mostly the same, but some things are a little different. We will be learning together, so please post questions (and answers if you've worked things out) in the help thread.
See more
See less
-
-
Pull the circlip off the inner one, knock the tripod joint off, and slip the outer one off the inner end.
That is of course if it's the set I think it is.'07 Transporter 1.9 TDI
'01 Beetle 2.0 -
So you need to remove the whole axle?Comment
-
Yeah, and you need an 8mm multispline bit to undo the bolts.'07 Transporter 1.9 TDI
'01 Beetle 2.0Comment
-
yeah all good have a set of them. I'll give it a shot tomorrow.Comment
Comment