Above Forum Ad

Collapse

Announcement

Collapse
No announcement yet.

Billy's Mk3 GL Daily.

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Billy's Mk3 GL Daily.

    Well I've finally decided to create a thread for my mk3 after owning it for about a year and a bit now.

    The white GL was/is my first car, it was born in 1997 with a manual gearbox and just over 175,000kms.

    It's came a long way over the last year and a half. Here's how she looked when I picked it up back in February 2012.



    I then picked up a set of Genuine Hella all black tails from rayray,




    Then came some matching Hella indicators and dummy fogs,


    Then came the trim respray!
    I had a seriously annoying paint crack coming through on the rear bumper, so the DIY-er in me began to show again.

    I firstly sanded the crack back;

    Then the whole bumper;

    and then sprayed it black!


    I then sanded and blacked the side stripes to match,



    Eventually I got round to doing the front bar too, finishing the look for now.


    The Gloss trim is different and awesome I think!

    I also sorted some fender flares to complete the 'tough' look.


    I also picked up a set of BB5 R5's... Yes RS reps ahaha
    They where on the car for quite a while until I recently sold them to Wade (Golfballs) for his mk2.


    The mk3 is also sitting on some FK streetlines coilovers, which honestly I really enjoy. But they could go lower

    The DIY install was really fun and a great money saver!



    Well that's how the mk3 sits now, it's back on stockies now with some Falken ZE912's.
    1990 Mk2 GTI 20vt - @mk2.20vt

  • #2
    But the whole reason I decided to make a thread today was because my wheels arrived!



    I'm not going to show what they are yet; but they are 16"s tall, 3 piece splits and not BBS RS ahaha the refurb will start once I take the tires off tomorrow... Hoping for 8.5/9inch rears

    Here's how the test fit went with the super meaty tires,
    Rears;


    Can't find a pic of the fronts but it's a little tucked.

    I plan on getting the wheels sorted before Day of the volkswagen this year!

    I will update this when ever I get some work done on the mk3!

    Thanks for viewing
    1990 Mk2 GTI 20vt - @mk2.20vt

    Comment


    • #3
      Here's a few more current pictures



      1990 Mk2 GTI 20vt - @mk2.20vt

      Comment


      • #4
        Looking great there buddy. An exceptionally clean MK3 base right there too. Keep up the good work

        Comment


        • #5
          Looking forward to seeing those wheels!

          Comment


          • #6
            Originally posted by mike1990 View Post
            Looking great there buddy. An exceptionally clean MK3 base right there too. Keep up the good work
            Thanks mate!

            Originally posted by anthony--t View Post
            Looking forward to seeing those wheels!
            I can't wait to finish them, hopefully I can get the tyres off today, if not for sure on the weekend. Then I can start the refurb!
            1990 Mk2 GTI 20vt - @mk2.20vt

            Comment


            • #7
              Radness!

              Comment


              • #8
                Mk3 love! Oh and did you sand down n prime the parts you painted?

                Comment


                • #9
                  Originally posted by junyip_69 View Post
                  Mk3 love! Oh and did you sand down n prime the parts you painted?
                  Thanks mate! Yeah of course! All in the preparation my friend ahaha I used a spray paint I found in bunnings, about $12-15 a tin and it worked brilliantly. I sanded the bumpers back, not to the bare texture but so there was no gloss left on the paint, then used a plastic primer made by the same company as the paints, I gave them a few coats of that. Primer was strange though as it was clear, not grey. Then I gave them a few coats of black and finally ended with a couple of layers of clear coat. Came up great for my first spray painting venture, might do the stock steelies later on for fun when the new wheels are sorted
                  1990 Mk2 GTI 20vt - @mk2.20vt

                  Comment


                  • #10
                    So keen for you to get those wheels finished for DOVW man.
                    Also, I can attest to how damn clean Billy's Mk3 is. It's silly shmick!
                    1976 VW Golf "Swallowtail" - Rallye Red (long term resto)
                    2009 Pirelli GTI - Stg3 killer
                    2009 R36 Passat - Daily baller
                    Originally posted by Peter Jones
                    You take corners on three wheels, and V8's can't catch you.

                    Comment


                    • #11
                      Originally posted by ByronRichesMk1 View Post
                      So keen for you to get those wheels finished for DOVW man.
                      Also, I can attest to how damn clean Billy's Mk3 is. It's silly shmick!
                      Thanks mate! Your the best <3 ahahaha
                      1990 Mk2 GTI 20vt - @mk2.20vt

                      Comment


                      • #12
                        Got the tyres off today! Starting to strip down the wheels now


                        Also brought the lip back to life a bit with some heat gun fun!


                        1990 Mk2 GTI 20vt - @mk2.20vt

                        Comment


                        • #13
                          Test fitted the new wheels today, can't wait to get them refurbished and wider barrels.





                          My helper for the day aha

                          1990 Mk2 GTI 20vt - @mk2.20vt

                          Comment


                          • #14
                            I really need to update this more but I haven't been doing a lot with the car recently, I've spent most of my days working on its wheels!

                            Here's the lips I've been polishing up, these are up for sale to fund some new wider lips and barrels.





                            I am going to be prepping the centres over the next couple of days too so I can get then ready for paint!

                            Spent a little time too working out the exact measurements, by the end we should be looking at 16x8 et12 fronts that poke 0.7mm and 16x9 et12 rears and poke around 3.7mm. Fitment should be beautiful!

                            Also might be getting my hands on some new cams and lifter (thanks to Byron aka ByronRichesMk1) so I'm excited for that, I might also be picking up a set of Volk CV-Pro for the Moterex cruise for charity at the end of this month (this is still a maybe though)

                            I will update again when I get **** done
                            1990 Mk2 GTI 20vt - @mk2.20vt

                            Comment


                            • #15
                              Well I sold off the Simmons lips and barrels a few days ago.



                              And I bought these as my temporary rollers!



                              Volk GRC's

                              Gunna run some meaty tyres for some that Motorsport look

                              My parents also purchased my birthday present today! Don't get it till November but I can't wait. New plates for me!


                              Can't wait for cruise for charity on the 27th of October!
                              1990 Mk2 GTI 20vt - @mk2.20vt

                              Comment

                              Working...
                              X