Tyre advise needed

[Kenji]

Hi every one!

I was wondering if any one has had
any experience with the brand falken??

are they any good??

I'm thinking this brand because I can get tyres
for under $150 and they are japanese
at least.

i don't realy wanna go korean or chinese
or spend over $150

my rims are the 15" vr6 ones

any other suggestions on tyres as
well as cheap tyre shops??


Thanks

[DubSteve]

I payed $125 for Continentals for the vr6 in December last year.

Don Cornell's Tyre Service
Cnr Stoney Creek Rd & Coveney St Bexley NSW 2207
ph: (02) 9502 4666

In Bexley ftw

[bsting]

Never liked Falkens much.
Can you get Toyo T1R's in oz? good bang for $ imo

[ScienceVR6]

i just got the toyo proxy's 4 for 132 each.

[rayray086]

What size Science?

[moto]

I've got Falkens on my car. They are not the real thing but they are satisfactory for daily use. Another tyre you could look at in the price range is the Pirelli PZero Drago. This is the P5000 Drago with a new tread pattern - probably to improve the noise factor. The old P5000 Dragos were damn good if you could stand the noise.

[ScienceVR6]

What size Science?

205/50 r15

[Tim]

BF goodrich are ok as well in this pricepoint. I used to have a set on my old 15" rims. theyre still roadworthy (just) and i put at least 40,000 kms on them.

I think they were about $160 per corner

[Kenji]

I payed $125 for Continentals for the vr6 in December last year.

Don Cornell's Tyre Service
Cnr Stoney Creek Rd & Coveney St Bexley NSW 2207
ph: (02) 9502 4666

In Bexley ftw

jesus thats cheap I was told like $200 plus for continentals

[BL33SU]

pirreli's for my dads n bros car cost $110 each @ taleb tyres Tempe

[Kenji]

pirreli's for my dads n bros car cost $110 each @ taleb tyres Tempe

Man thats crazy cheap mates rates??

[mikinoz]

Yokohama A-Drive are a decent piece of rubber, but, the R1 variant is not available in the size you need.

[BL33SU]

Man thats crazy cheap mates rates??

nope.. they were about 125 or sumthin and they gave evn cheaper if we bought all 4 i think..

[Kenji]

nope.. they were about 125 or sumthin and they gave evn cheaper if we bought all 4 i think..

--------------------------------------------------------------------------------

Thanks
1DUB2C!
I got the cheap tyres it was great value
I got my wheels alligned there as well
but they say they can't do the camber
I went back with the workshop manual
and said you can do it look!! and then they pulled
the whole we don't have the tool.
don't all mk3s have the tool on the car some
where??