Aussie Mk3 Count

[Glynn.]

Location: Brisbane
Model: GL
Year: 94
Mods: coilovers exhaust bottlecaps other little things
Picture:

[KKK VR6]

There should be alot more !!

[VR28LT]

There should be alot more !!

Where is yours ?

[KKK VR6]

Actually it's getting resprayed
An then soon to be replaced

[patmould93]

Pat's VR6

Location: Melbourne, VIC
Model: VR6 Colour Concept (manual)
Year: 1995
Mods: Stock as a rock unless you count personalised plates and white badges. Even the horrible stock stereo is in... however coming up soon will be the full stereo (Sony headunit, Rockford Fosgate splits in front, coaxials in back, MB quart 4.125 amp, Pioneer sub). The plans after that are coilovers, catback exhaust and cold air intake once I get out of year 12 at the end of this year and start getting some money and do a bit more research on them.

Pic:

[Water Boy]

Im sure we have a few more Mk3's on the forum!

[badgerboards]

i had my green mk3, now have a charcoal vr6

[Mk3 AAA]

Last owner of this...

Location: Bris'
Model: VR6
Year: 1997
Mods: South African VR6 wheels (later A8 replicas), koni yellow suspension, Euro lip, Sony....something stereo, tint.
Had some history with other members on the forum. Was damaged while parked.



Rudiger's (on this forum, but never on it)
Location: Bris
Model: VR6 Colour Concept
Year: 1996
Mods: Sound system, my old Konis, had RS4 replicas for a while.
Also previously owned by another forum member.




Mine now...

Model: Vento
Year: 1995
Mods: Coilovers, Audi fat 5s, US front lip, 4 slat grill, smoked tail-lights, smoked fog light fakes, smoked side indicators, some drive-train stuff like AAA engine, BFI 0.5 mounts etc. VR6 brakes, interior etc.

Mods to come: carbon spoiler, under-body neons and roof scoop :p

[dylan8]

Model: Black VR6
Year: 1994
Mods: HD clutch, lightened flywheel, Remus exhaust, sounds system, air horn, green stuff pads
Had leather, sunroof, towball.
Wont post a pics becuase its been taken apart, previous owner was a VWW man too

[anywherebuthere]

Location: Moonee Ponds, VIC
Model: Cabriolet (Manual)
Year: 1996
Mods: None, yet.


(boyfriends vr6 in the background)

[Ben J]

Well today I sent one to the scrap metal yard, so subtract one of the more mint examples of a mk3 Australia had left



Enter new much more ratty mk3:
Location: Toowoomba (soon to be brisbane), QLD
Model: Golf CL 2 door
Year: 1995
Mods: (some of these are soon to come but ill forget to update this) Air bag suspension, built NA vr6 with cai, ported throttle body, ported 2.9 clone intake manifold and lower intake mani, ported head with valve job, ported exhaust manifolds and downpipe, full 2.5 exhaust with magnaflow mufflers, r32 oil pan and pump, stage one engine mounts with engine spacers, lightened and underdriven pulleys, lightened flywheel, new cluth, all vr6 running gear refreshed with poly and heavy duty bushing where appropriate, rear sway bar, custom boot install and sound system, etc etc, without giving away too many little secret plans

Photo: (dont worry, its lower now that the frame has literally self notched a good 3/4 of an inch, and the point where the rear tyres hit the wheel wells have worn down

[Mk3 AAA]

Doesn't look mint mate. :p

[Ben J]

Was before the crash ;P Anyone who saw it will agree, I like to think that I can say stuff like that now that I dont own it without sounding too arrogant, haha. Hardest pulling stock vr6 I drove out of the 15 or so I tested, basically perfect paint and an interior which didnt look a day over 3 years old... Really, I wish it never came into my hands which slammed it, flogged it, and then crashed it, and that the first car was something ratty. Ohwell. Haha Most of the good bits will live on, most of the good panels have gone to "Dark" on here, engine is going to be built up and put in my 2 door, and most of the interior is spread across the country, with the dash and associated panels going into a mk2, seats etc into my new car and other random bits and pieces to whoever bought them.

New mk3 is very ratty

[Mk3 AAA]

Haha was just taking the mickey mate, sounds nice...although, you never got to drive my maroon one, it must've been broken in by a serious lead-foot it was so lively, and I've driven my share of VRs (I reckon OBD2 has a tiny bit more punch)... Bora_Sport may confirm that.
That red colour concept I posted is incredibly smooth for an old engine, have seen it bury some cars that should be well out of its league. Was the car that sold me on VR6s, also doesn't have a lot of exhaust so sounds the bees knees.

[KKK VR6]

Location: Western Sydney
Model: VR6
Year: 1996
Mods: stock for now
Picture: