Above Forum Ad

Collapse

Announcement

Collapse
No announcement yet.

Coolant leak

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Coolant leak

    Grr, this is actual problem solving.
    Diagram V13-1050 in the Bentley manual.
    Is the water pump the one up and to the right of the crank pulley?
    I have a leak appearing to come from there and I'm just getting a second opinion on the matter.

    TIA
    Mal

  • #2
    is coolant leaking and collecting near/on chasis rail?same thing happened to me was water pump.

    76 Scirocco

    Comment


    • #3
      Thnaks Dom, yeah mate it is.

      WIll wait and see if Matty/anyone else has one. Try and support hem. If not, to GAP I go. Haha. Pretty severe. GTI power till it's fixed yay lol

      Comment


      • #4
        sweet they're bit of a hassle to get to i think you can get one from vw for like 150ish

        76 Scirocco

        Comment


        • #5
          Get one with a metal Impellor, the VW ones are plastic
          I have some if in need and yes they are fun to change.
          sigpic Camden GTI Performance. VW / AUDI Specialists
          All Mechanical Work, Log book Servicing, New and used Parts and Imports
          19-20/6 Badgally Road, Campbelltown, 2560
          02 4627 3072 or 0423 051737 www.camdengti.com

          Comment


          • #6
            Secret is take the nut off the front engine mount and loosen the rear one under the master cyl and jack her right up. Last one i took off the fuel pipes at the rail too, only extra 2 clips really.
            Make sure you have the heater on hot and on when you bleed the system
            Jmac
            Alba European
            Service, Diagnostics and repairs. Mobile Diag available on request
            Audi/VW/Porsche Factory trained tech 25+ yrs exp
            For people who value experience call 0423965341

            Comment


            • #7
              Originally posted by Jmac View Post
              Secret is take the nut off the front engine mount and loosen the rear one under the master cyl and jack her right up. Last one i took off the fuel pipes at the rail too, only extra 2 clips really.
              Make sure you have the heater on hot and on when you bleed the system
              Jmac
              Thanks Jimmy.

              Points to note

              Comment

              Working...
              X