Mk3 Pod/Induction Set Ups.

[MattyT]

Yeah its a real gutral growl. I <3 it.

[Water Boy]

Does anyoe have the part number of the K&N Panel filter for a stock airbox?

[schoona]

I now run a K&N pod. I absolutely love the gnarl it gets about 3200rpm and under load. It's only cable tied to the arch side for support at the moment, looking at buying some stainless to make up a box though.

Noise alone is worth it

[Golf Houso]

It's only cable tied to the arch side for support at the moment, looking at buying some stainless to make up a box though.

$15 from bunnings will do it...

[schoona]

$15 from bunnings will do it...

For the Stainless plate Branko?

[Golf Houso]

For the Stainless plate Branko?

It wasn't stainless tbh, but It shouldn't cost more than $30 for the lot mate, I suggest you buy some clips and joins as well whilst your at it, I'll take some pictures of mine on Thursday so you can get an idea of what sizes you need although I won't post them here because of the despicable state they're in lol...

[schoona]

I was going to weld/drill/bolt etc because my bay is boring!

I'll scout out the options though thanks mate

[Water Boy]

A good reveiw:

http://www.australianauto.com.au/HTM...hoot%20Out.pdf

[MattyT]

A good reveiw:

http://www.australianauto.com.au/HTM...hoot%20Out.pdf

404. Fael.

[Dubdubdubdot]

404. Fael.

+1...the link is loopy

[Water Boy]

Sorry here wo go:

http://www.australianauto.com.au/HTML/Images/Air%20Filter%20Shoot%20Out.pdf

[rayray086]

Ah yeah, I had the AutoSalon magazine that had that feature. I don't understand how they did the filtration test though:

Each filter was tested straight out of their boxes at ten inches of water...

[Jarred]

Ah yeah, I had the AutoSalon magazine that had that feature. I don't understand how they did the filtration test though:

i think the 10 inches of water has got to do with the pressure they were tested at

[Mr. JLT]

CAI on VR6 and the filter is in the fender. CHeers J

[Mrk_Mickey]

Woah, nice engine bay...was that your car JLT?