Hub nut socket size?

[russ83]

Hey guys,

QQ, what size is the hub nut socket and length?

Looks to be 30mm but wanted to confirm. cheers

[h100vw]

Yeah, 30mm. I use a deep one, because I have it, not sure if a shallow one would work, it's been a while since I undid one.

Gavin

[russ83]

Thx mate, off to buy 1 tomorrow

[h100vw]

And a 2 foot bar if you don't have one already.

Gavin

[AusScare]

And a 2 foot bar if you don't have one already.

Gavin

I need one of these.

Plus because my car is in the air, the other side just spins too. Any way to prevent this, apart from sticking a 30 in the other side too?

[h100vw]

Cough, ahem, screwdriver in the vents of the disc. Cough.
Gavin

[G60JAY]

I need one of these.

Plus because my car is in the air, the other side just spins too. Any way to prevent this, apart from sticking a 30 in the other side too?

Just get a mate to put there foot on the brakes while you loosen it..

[Golf Loon]

Just get a mate to put their foot on the brakes while you loosen it..

Put a wheel nut or two in whilst trying either of the above methods and you will avoid snapping the little locating bolt that holds the disk in place.

[h100vw]

Put a wheel nut or two in whilst trying either of the above methods and you will avoid snapping the little locating bolt that holds the disk in place.

Oh yeah, forgot to mention that bit. That screw is made from marshmallow.