HELP: Leaning out??!?!

[GoLfMan]

It's a 40 DCOE right? i'm guessing 32 or 34mm chokes. Most likely 32.

yeh well car wont even start now carb will be coming off Friday, its too cold now!

[Preen59]

slap a solex on it or something that you know works and make sure it's the carby thats the problem.

[Oneofthegreats]

too late dude!

anyways, Jarred an I just turned her back to TDC took the dizzy cap off and it was out 180 degrees!!! is that possible? May explain things?

anyway bought a rebuild kit for it, should be coming friday at which point ill also find out what size jets i have in there!

Turn it over again.

Don't just go off the flywheel mark. Also use the cam pulley marking's. That's what there there for.

If it's 180 out, it won't run at all & spit fuel out the carb, most likely with flames too!

[Peter Jones]

too late dude!

anyways, Jarred an I just turned her back to TDC took the dizzy cap off and it was out 180 degrees!!! is that possible?

Yes - your leads must be 180° out too.

Pete

[Preen59]

Yes - your leads must be 180° out too.

Pete

Yeah, that's right.

By the way, that wouldn't make any difference to the performance.

[Jarred]

Yes - your leads must be 180° out too.

Pete

We did line up, from cyc 1 was lined up with lead 1 at the marking on the dizzy, while the engine was at TDC (we check by removing the spark plug trick, it is lined up with the flywheel TDC too)

Wouldn't it fire on atleast on cycl 1? and not the rest if we mixed it up?

EDIT:
We havn't looked at cam pully markings yet. is it possible the intermediate shaft is out of whack from when josh changed the timing belt, hence why the dist was so far out?

[Peter Jones]

Yeah, that's right.

By the way, that wouldn't make any difference to the performance.

So long as all his leads are 180° out

Pete

[Preen59]

So long as all his leads are 180° out

Pete

Yeah, but it wouldn't have been firing on all cylinders if it wasn't.

Please tell me you guys made sure it's firing on all cylinders?

[Peter Jones]

We did line up, from cyc 1 was lined up with lead 1 at the marking on the dizzy, while the engine was at TDC (we check by removing the spark plug trick, it is lined up with the flywheel TDC too)

Wouldn't it fire on atleast on cycl 1? and not the rest if we mixed it up?

EDIT:
We havn't looked at cam pully markings yet. is it possible the intermediate shaft is out of whack from when josh changed the timing belt, hence why the dist was so far out?

Ummmm I'm not quite understanding you at this point.

This is a 4 stroke motor, the pistons go up and down twice for every rotation of the distributor. To make sure you're on the firing stroke look for the dot on the motor side of the camshaft pulley to line up with the rocker cover flange at the front of the motor.

Pete

[Peter Jones]

Yeah, but it wouldn't have been firing on all cylinders if it wasn't.

Please tell me you guys made sure it's firing on all cylinders?

Could explain the "pinging" at all RPM

Pete

[Preen59]

Could explain the "pinging" at all RPM

Pete

Yeah true.

So hard to help out when you can't be there to see what's going on..

[GoLfMan]

how about this....
a slab of the persons favourite bevvy to whoever helps me get this dam car sorted!!!

[GoLfMan]

Turn it over again.

Don't just go off the flywheel mark. Also use the cam pulley marking's. That's what there there for.

If it's 180 out, it won't run at all & spit fuel out the carb, most likely with flames too!

we whipped out sparky #1 and TDC'd it that way and the flywheel marking was in the right spot too.

i recon its 180 out now, it wont run and it does shoot flames out the carb.... HMMMM

[Oneofthegreats]

we whipped out sparky #1 and TDC'd it that way and the flywheel marking was in the right spot too.

i recon its 180 out now, it wont run and it does shoot flames out the carb.... HMMMM

You've lost me fella's sorry.

If you've got a manual, read the section about removing & refitting the dizzy & read it carefully TWICE! Then follow the instruction's to the letter.

[Peter Jones]

how about this....
a slab of the persons favourite bevvy to whoever helps me get this dam car sorted!!!

Nah, this is way more fun!


Pete