Above Forum Ad

Collapse

Announcement

Collapse
No announcement yet.

rear sway bar??

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • rear sway bar??

    im convinced a rear sway bar would stiffen up my suspension set up
    nicely, but im hard pressed to find a cheap genuine one...(if anyone
    has one for sale for not too much then please pm me)

    so..

    is there a cheap alternative bar that would fit??

    or...

    i was thinking of modifying the standard rear trailing arm setup to acheive
    the same outcome.... maybe by welding in some extra angle across the
    back of the bar, or some sort of cross member between the trailing arm
    and torsion bar...

    any ideas, suggestions or comments would be much appreciated

    cheers

    mike
    TDI mk1 on the road!!


  • #2
    Welding is not recomended.
    See if Loon can get you a genuine.

    Comment


    • #3
      Talk to worm. He just had one listed on ebay which is genuine.

      Comment


      • #4
        Hey I want a sway bar too! Both front and rear. Anyone got one?

        Tim
        MK1 floG soon to have 16v 2L with cable change gbox - need a 16v turbo manifold

        "Fit the gearbox ya bum." Loon - best post ever!

        Comment


        • #5
          I've got no sway bars but I've probably got a pair of ANTI SWAY bars out the back if your'e interested Tim. All you have to do is ask.
          Widebody Cayman S Turbo, 83 ur Quattro
          2000 996 C4 cab,12 Scirocco R OEM+ STG2+
          72 914 (3.2S boxster pwr), 92 G60 Corrado
          76 Scirocco(TFSI and DSG) 2018 Tiguan,Eureka,81 924.

          Comment


          • #6
            ARBs don't stiffen up your suspension they decrease the roll.
            Get a set of stiffer springs dude.

            Comment


            • #7
              yeah im not silly... i have stiff springs, hard shocks and a front anti roll bar... my front has very little roll compared to the rear which causes the
              front outside wheel to cop all the mass round a bend... so i want to reduce the understeer by improving my rear setup...

              i have a spare rear trailing arm, so im fine to test some ideas ... i was thinking about (rather than welding) drilling holes in the filllets between the bar and arms and connecting the two sides with a bar of some sort... should theoretically achive the same thing (assuming the fillets are strong enough)
              TDI mk1 on the road!!

              Comment


              • #8
                Pete, I will will be over shortly!!!!!
                MK1 floG soon to have 16v 2L with cable change gbox - need a 16v turbo manifold

                "Fit the gearbox ya bum." Loon - best post ever!

                Comment


                • #9
                  Re: rear sway bar??

                  Originally posted by mollins
                  im convinced a rear sway bar would stiffen up my suspension set up
                  nicely, but im hard pressed to find a cheap genuine one...(if anyone
                  has one for sale for not too much then please pm me)



                  mike
                  You used the word stiffen ? Who's silly then
                  Don't use a front bar, take it off and feel an improvement.

                  Comment


                  • #10
                    Re: rear sway bar??

                    Originally posted by Golfwise

                    You used the word stiffen ? Who's silly then
                    true.. haha

                    i've driven golfs without the front bar and i prefer the feel with it on... the vw dudes back in the day must have put them on the gtis for a reason.. its just a bit annoying that all you get is nice safe understeer way before the rear end is pushed to its limits.. plus theres no back end slidage sideways action ...

                    just another question.. ive found the front lower-stress bars make a huge difference.. but i was wondering if the front strut brace, or the rear upper stress bar make noticable improvements?
                    TDI mk1 on the road!!

                    Comment


                    • #11
                      Bottom Front brace, Top Front, Back Top. In that order for usefullness.

                      You only need the back for motorsport really.
                      sigpic Camden GTI Performance. VW / AUDI Specialists
                      All Mechanical Work, Log book Servicing, New and used Parts and Imports
                      19-20/6 Badgally Road, Campbelltown, 2560
                      02 4627 3072 or 0423 051737 www.camdengti.com

                      Comment


                      • #12
                        My point is that one shouldn't put a front ARB on without a rear one .The rear one is the most important one not the front one.Its not an old Holden .
                        The factory put ARBs on their GTi etc in pairs not front alone and in some cases put rear ones on without the front.
                        Thats why I suggested you take the front one off untill you get a rear one .
                        Lower stress bar is a must as it should have been built into the original design but in 1975 on 5 inch wheels and 155/13 tyres the slip angle factor would have saved any extra stresses on the lower pivot points.

                        Comment


                        • #13
                          Originally posted by Golfwise
                          Lower stress bar is a must as it should have been built into the original design but in 1975 on 5 inch wheels and 155/13 tyres the slip angle factor would have saved any extra stresses on the lower pivot points.
                          That's why they put them as standard on 16V Sciroccos. The front lowers are the only stress bars that really make a big difference. Adjustable ones are BS. Adjust the body to factory specs.

                          Comment


                          • #14
                            Umm!!
                            What's a lower stress bar?
                            What is it supposed to do?

                            Comment


                            • #15
                              Measure a few Golfs and you will find out.

                              Comment

                              Working...
                              X