If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed, registering will remove the in post advertisements. To start viewing messages,
select the forum that you want to visit from the selection below.
This means you should apply for your renewal now to avoid any disruptions to your membership whilst the renewal process is taking place! NOTE: If you have an auto renewing subscription this will happen automatically.
Has anyone played with short shift kits for their mk1s. I loved the weighted shift of the cordoba (a mk3 trick I think) and would like something similar on the Golf. There are a few available in the US but I am wary of buying sight-unseen.
Ahh, yes, lengthened the top of the relay shaft with a piece of 5 mm flat bar 40 mm long, then drilled holes at 105,125 145 centre distance ( from the shaft to the centre of the hole for the rod bushing ) think 105 is the std distance for a factory 5 speed trans. Unsure if the 4 speed is the same measurement or not.
I also increased the selector rod length 15 mm, but found this to be to much for the " across the gearshift gate " movement at the shift lever..put a std one back in.
Did this about 3 years ago, replaced all the bushes etc at the same time, U can get a kit pretty cheap, still in use. It is set on the greatest distance and does definately cut down the fore aft movements. still need to make a weighted rod yet...
Yeah.. Pics please. Members have show an interest in having a topic that includes mods and "how-to-do-its" such as this. So if you can, please upload pics and write a description of how you did it and one of the chalkies in our community will edit and post in the new topic frum. It will join gems such as Syncro's headlight mod.
Tweet
Comment