If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed, registering will remove the in post advertisements. To start viewing messages,
select the forum that you want to visit from the selection below.
This means you should apply for your renewal now to avoid any disruptions to your membership whilst the renewal process is taking place! NOTE: If you have an auto renewing subscription this will happen automatically.
You NEED a high flowing Provent, designed with trucks and the like in mind. And again, the problem is tubing, I have high quality hose that will fit over the Provent fittings, but the hose is HUGE, and too hard to work with in the engine bay, so I actually used the smaller hose I bought to fit the drain. And yes, it's sikaflexed in. Remember it has to handle both oil, and the hot engine bay temps. [/URL]
Did you try this place http://www.pirtek.com.au/ ?
They are in 5min drive from my office, I will visit them after I buy Provent.
Let me know how you go. I'm reluctant to sink any more money into the Provent install for now, and have quite a collection of hose and fittings that didn't work already!
2014 Skoda Yeti TDI Outdoor 4x4 | Audi Q3 CFGC repower | Darkside tune and Race Cams | Darkside dump pDPF | Wagner Comp IC | Snow Water Meth | Bilstein B6 H&R springs | Rays Homura 2x7 18 x 8" 255 Potenza Sports | Golf R subframe | Superpro sways and bushings | 034 engine mounts | MK6 GTI brakes |
Do you know that you could use the copper tubing to bent the exact shape pipes you need and use only small pieces of the silicon hoses to connect them.
I think I'm going to plumb it that spare Provent I have in our Golf and I post the pictures when finished.
Very easy to install in T5 no elbows needed just use silicon hose which is more flexible than rubber hose.
The bracket is fixed using existing threaded hole that also holds the added Anderson plug for connecting CTEK battery charger to charge the battery since I do many short trips during the day.
I know this is an old post but I've been scouring the web trying to find an image of the location for a proven t in a 2.5D T5 and this is the only reference I could find and the images seem to be missing in action.
Any chance of another link or reposting the pics?
I know this is an old post but I've been scouring the web trying to find an image of the location for a proven t in a 2.5D T5 and this is the only reference I could find and the images seem to be missing in action.
Any chance of another link or reposting the pics?
I’ll check in my google drive. But, it’s very easy... on left side, kind of next to the battery and bracket attached to M6 bolt from the top.
Tweet
Comment