G-8VXWWTRHPN In need of help - VWWatercooled Australia

Announcement

Collapse
1 of 2 < >

Email Notifications Failing (mostly Telstra)

Hello everyone. Seems there is an issue with Telstra (possible others) blocking email from our server. If you are trying to sign up I would suggest a different email if possible. If you're trying to reset your password and it fails please use the Contact Us page:
2 of 2 < >

Welcome to the new look VWWatercooled

After much work and little sleep there is a new version of the forums running on more powerful and recent hardware as well as an upgraded software platform.

Things are mostly the same, but some things are a little different. We will be learning together, so please post questions (and answers if you've worked things out) in the help thread.

See more
See less

In need of help

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • In need of help

    Hey guys. I have a vw t5 with caac.
    Im from Melbourne and stuck in Sydney with the van in limp mode.
    I have the Fuel Pressure Sensor code 5244.
    Could anyone help me out with a solution so i can get home??
    If i sent 5 volts to the signal wire would that get me out of limp mode to get home?
    Im clutching at straws everywhere is closed

    Sent from my SM-G930F using Tapatalk

  • #2
    How did you go?? Only just saw this post. Sorry not technical enough to help out.

    Comment


    • #3
      Van still broken down. I replaced the fuel rail with the sensor and valve but still no good. But it might be down to an engine speed sensor

      Sent from my SM-G930F using Tapatalk

      Comment


      • #4
        So still havent found the problem with my van.
        It brings up fault codes and when the corresponding sensor is changed it then brings up a different fault code. But the symptoms are always the same with only the glowplug light on the dash and in limp mode.

        So far the fuel pressure sensor, fuel regulator, speed sensor and ecu have been changed. Now its bringing up an inlet manifold sensor.
        The only common fault code seems to be an abs fault.

        Really stumped as to what could be going, any help would be greatly appreciated.

        Sent from my SM-G930F using Tapatalk

        Comment

        Working...
        X