I have tried searching the forum, but is anyone aware of where the fuse is located for the footwell lights? I tried to change the bulbs to LED's, but no luck, so changed back to the original bulbs, and they are not working. All of the other interior lights are okay, and I checked the settings on the dash, but no luck. Any help would be appreciated.
Above Forum Ad
Collapse
Announcement
Collapse
1 of 2
<
>
Email Notifications Failing (mostly Telstra)
Hello everyone. Seems there is an issue with Telstra (possible others) blocking email from our server. If you are trying to sign up I would suggest a different email if possible. If you're trying to reset your password and it fails please use the Contact Us page:
2 of 2
<
>
Welcome to the new look VWWatercooled
After much work and little sleep there is a new version of the forums running on more powerful and recent hardware as well as an upgraded software platform.
Things are mostly the same, but some things are a little different. We will be learning together, so please post questions (and answers if you've worked things out) in the help thread.
Things are mostly the same, but some things are a little different. We will be learning together, so please post questions (and answers if you've worked things out) in the help thread.

The new forum software is an upgraded version of what came before, it's mostly the same but also a little different. Hopefully easier to use and more stable than before.
We are learning together here, so please be patient. If you have questions, please post them here. If you have worked something out and can provide an answer,
See more
See less
Footwell light fuse
Collapse
X
-
cycle the ignition on and off. when it detects a blown bulb it turns off the power to that circuit, when a new bulb is fitted it usually doesn't work until the ignition is cycled, then it rechecks the circuit, see's it is now OK and then return's the voltage.... If not then yeh, possible blown fuse.....VDUB... (to fit LED's without internal resistors you usually have to deactivate "bulb monitor" with VCDS as the LED doesn't draw enough current and acts like a blown bulb)VOLKSWAGEN TECHNICIAN - 16 YEARS OF PAIN..VCDS CODING- FAULT DIAGNOSIS - PRE PURCHASE INSPECTIONS- REPAIRS9W2 BT KITS -$300 - 9W7 BT KITS - $450 - CANBUS UPGRADE $150BRISBANE / GOLD COAST
-
Anyone able to point me in the direction of a fuse diagram?
Just swapped out my interior halogen bulbs in a FL scirocco and everything works except for the footwell lights - passengers footlight was initially working, but once I plugged in the drivers side, none of them work. They flicker on ignition then go off, the original lights don't work at all anymore.
Comment
2025 - Below Forum
Collapse
Comment