Above Forum Ad

Collapse

Announcement

Collapse
No announcement yet.

Golf V rear swaybars

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Golf V rear swaybars

    Given the understeer characteristics of the stock GT golf, I was wondering:

    1. Is the rear GTI swaybar any beefier?
    2. Where can I get a beefier rear swaybar from over here? Reluctant to just front up to Pedders and watch them scratch their heads at a VW....

    I'm after more neutral handling, nothing drastic.
    2014 Skoda Yeti TDI Outdoor 4x4 | Audi Q3 CFGC repower | Darkside tune and Race Cams | Darkside dump pDPF | Wagner Comp IC | Snow Water Meth | Bilstein B6 H&R springs | Rays Homura 2x7 18 x 8" 255 Potenza Sports | Golf R subframe | Superpro sways and bushings | 034 engine mounts | MK6 GTI brakes |

  • #2
    Try Whiteline they seem to make a full range of bars.

    Comment


    • #3
      Neuspeed you can get through Rennenhaus:


      H&R also make them for the MK5 - you can get those through GC Corp (who also sell the Whiteline gear)


      Remember to factor in local installation $, unless you want to jump in and DIY.
      The rear sways are supposed to be relatively easy, assuming you're not too hamfisted
      .: MK2 Golf GTI [FWD R32 Project]:.

      MK4 R32 parts for sale - click here

      Comment


      • #4
        I've got a white line bar on my Astra & a Neuspeed bar on my passat.

        The neuspeed is a better engineered product than the whiteline. The whiteline bar was $220 & the neuspeed around $520. The little brackets that hang down from under the shock mounts - in the neuspeed kit they're a kind of ball joint arrangement with adjustable length. In the whiteline kit they were a figure 8 with two urethane bushes. The whiteline kit in the astra doesn't mount in the rear axle either. The neuspeed brackets clip over the rear axle. I think in the case of the astra this is common to the breed. UK after market rear bars mount the same way.

        Performance wise - its not apples/apples. The astra has stock everything else but the passat has coil overs. I think though that the weight distribution is better in the astra & the car is heaps shorter. This made the addition of the rear bar a lot more noticeable. This would be similar to a golf esp. if you have a lateral mounted engine (ie better weight distribution).

        Comment


        • #5
          Thanks lads, I'll do some research on those links and let you know how I go.
          A swaybar fitment should be relatively easy like you say.

          cheers!
          2014 Skoda Yeti TDI Outdoor 4x4 | Audi Q3 CFGC repower | Darkside tune and Race Cams | Darkside dump pDPF | Wagner Comp IC | Snow Water Meth | Bilstein B6 H&R springs | Rays Homura 2x7 18 x 8" 255 Potenza Sports | Golf R subframe | Superpro sways and bushings | 034 engine mounts | MK6 GTI brakes |

          Comment


          • #6
            Originally posted by xcgumby View Post
            I've got a white line bar on my Astra & a Neuspeed bar on my passat.

            The neuspeed is a better engineered product than the whiteline. The whiteline bar was $220 & the neuspeed around $520. The little brackets that hang down from under the shock mounts - in the neuspeed kit they're a kind of ball joint arrangement with adjustable length. In the whiteline kit they were a figure 8 with two urethane bushes. The whiteline kit in the astra doesn't mount in the rear axle either. The neuspeed brackets clip over the rear axle. I think in the case of the astra this is common to the breed. UK after market rear bars mount the same way.

            Performance wise - its not apples/apples. The astra has stock everything else but the passat has coil overs. I think though that the weight distribution is better in the astra & the car is heaps shorter. This made the addition of the rear bar a lot more noticeable. This would be similar to a golf esp. if you have a lateral mounted engine (ie better weight distribution).

            Thanks a heap for your input mate. Given the big cost difference, it's nice to hear the real world view. Sounds like you are saying the cheaper set would be fine for a smaller more balanced car, such as the golf. I'm pretty impressed with the stocko handling to be honest, I'm just after a bit less understeer and a little less roll.
            2014 Skoda Yeti TDI Outdoor 4x4 | Audi Q3 CFGC repower | Darkside tune and Race Cams | Darkside dump pDPF | Wagner Comp IC | Snow Water Meth | Bilstein B6 H&R springs | Rays Homura 2x7 18 x 8" 255 Potenza Sports | Golf R subframe | Superpro sways and bushings | 034 engine mounts | MK6 GTI brakes |

            Comment


            • #7
              H&R seem to be a nice mid priced bar, the whiteline looks fine, but is welded whereas the H&R and Neuspeed are forged units from overseas as XC has mentioned. For the little extra the H&R is looking good. Only drama is the stock rear is 21mm, and everone only offers 22mm or 24mm options. 22mm is only 20% stiffer, but 24 is a whopping 71% ( phew ).

              I'll go for an adjustable though, as 24mm may be a bit too much... especially since the stock front is only 25mm. I guess I can always upgrade the front too, but I'm not after a go-cart.

              thanks again guys!

              I'll give them a call next week.
              2014 Skoda Yeti TDI Outdoor 4x4 | Audi Q3 CFGC repower | Darkside tune and Race Cams | Darkside dump pDPF | Wagner Comp IC | Snow Water Meth | Bilstein B6 H&R springs | Rays Homura 2x7 18 x 8" 255 Potenza Sports | Golf R subframe | Superpro sways and bushings | 034 engine mounts | MK6 GTI brakes |

              Comment


              • #8
                There are several write ups of various suspension bits and pieces, including the pros/cons of just getting the rear bar, if you look at the Australia section of the golfmkv forum.

                Comment

                Working...
                X