17 or 18 inch on GTI MK6

[Martin]

not picky about replicas.
budget around 1500 for rims.

replicas rims range from $800 to $1100 (and $1400 with crap tyres) so you should be under budget

Search ebay for your desired wheel diameter and width (make sure you know what PCD and CB and ET you need)

[alphabeatsco]

replicas rims range from $800 to $1100 (and $1400 with crap tyres) so you should be under budget

Search ebay for your desired wheel diameter and width (make sure you know what PCD and CB and ET you need)

what's the PCD and diameter for gti mk6?

[Dutch77]

PCD is 5 x 112, ET is 51 I believe.

[walbjj]

PCD is 5 x 112, ET is 51 I believe.

centre bore is 57.1. u can go to about +42 offset, but run slightly thinner tyres, say a 225. im running 235/35/19 on a 19x 8 rim with +45 offset.

i recommend vmr for decent reps. they occassionally have specials where they r sub $1k delivered. or u can get a set used on the forums, here and over at the toher guys

[alphabeatsco]

centre bore is 57.1. u can go to about +42 offset, but run slightly thinner tyres, say a 225. im running 235/35/19 on a 19x 8 rim with +45 offset.

i recommend vmr for decent reps. they occassionally have specials where they r sub $1k delivered. or u can get a set used on the forums, here and over at the toher guys

i've heard about VMR, how's the quality?

[walbjj]

i've heard about VMR, how's the quality?

vmr have been around for a while and a lot of the euro car guys buy them as an alternative to the known brands such as bbs, oz racing, etc. they have decent styling, decent quality in construction and wont break the bank.

[alphabeatsco]

Where can I buy vmr

[walbjj]

Where can I buy vmr

besides getting them online from overseas, which i would look at first, there are a few local distributors
VMR Wheel Info and Pricing

otherwise, ebay for vw wheels