Default Map zoom with FW 4120

[thezoneR32]

Since upgrading to FW 4120 the default map zoom can be either 400m or 750m after setting a destination depending what mood its in. When you really need 200m for optimal navigating and its a pain to change while your driving and dangerous. Does anyone know if this can be reset?

Cheers

[Guest001]

Since upgrading to FW 4120 the default map zoom can be either 400m or 750m after setting a destination depending what mood its in. When you really need 200m for optimal navigating and its a pain to change while your driving and dangerous. Does anyone know if this can be reset?

Cheers

I usually do it have it set at 25m by touching the screen and moving the pointer

There is some instruction in the RNS510 supplement in the folder with the manual

Also you can put it on auto zoom and it will focus in in city environment

[Ryan_R]

With the latest firmware mine zooms out when I start the car, but it's not difficult or distracting to zoom in by turning the dial on the right

[thezoneR32]

With the latest firmware mine zooms out when I start the car, but it's not difficult or distracting to zoom in by turning the dial on the right

Turing the dial does not work for me?

[Buckets]

works for me...turn CCW to "zoom" out and CW to zoom in. But I have had mine set to auto for the last week or so and it works beautifully.

[Guest001]

Turing the dial does not work for me?

"PUSH IT IN " and turn it Dont just "TURN" it

[tonymy01]

works just turning my one? that is what I recall from memory anyway.

[Guest001]

works just turning my one? that is what I recall from memory anyway.

Tried that Didnt work, did something else so pushed it in and woop de do it zoomed in and out.

[tonymy01]

ahh,I know the confusion. pushing in toggles auto or manual. so once in manual, you can turn and will zoom. mine is always in manual.