Above Forum Ad

Collapse

Announcement

Collapse
No announcement yet.

Battery drain after Columbus firmware upgrade

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Battery drain after Columbus firmware upgrade

    Hi All

    I have upgraded the firmware on my 1T0 035 680A from the link in this forum to 3810 for the early A version. The
    can-gateway is as below

    Address 19: CAN Gateway Labels: 1K0-907-530.lbl
    Part No SW: 1K0 907 530 Q HW: 1K0 907 951
    Component: J533__Gateway H16 0202
    Revision: H16 Serial number: 2700K087170117
    Coding: ED807F0E4006021303
    Shop #: WSC 73430 790 00000
    VCID: 356BD69A25D1

    I believe that this should not have a power drain issue that is covered in this and many other forums, but the battery flattened itself overnight. There is now a frequent 'click' from the passenger side of the car, I believe it to be a relay. There is also a fan noise that coincides with the fan running in the Columbus.

    Has anyone else had this issue, or could it be something else?

    I dont have a working copy of 2764 that was in it so can't downgrade back to it.

    Any advise/help will be greatly appreciated.

    Tom

  • #2
    Go to this thread for links to all past and present FW versions:

    http://www.vwwatercooled.org.au/foru...nks-59759.html
    MY11 Tiguan 147TSI (SOLD)

    Comment

    Working...
    X