Plan to replace RCD 310 by RNS 510 in 2011 Tiguan

[Explorer2]

Hi,

Before I order the RNS 510, I just want to make sure is it that simple I can replace it by myself. I found some people they need re-coding or VCDS, VAGcom, can-bus issue, etc.... on the other hand some people take only 15 -30 minutes to replace it.

My Tig is originally equipped with MDI and bluetooth. Is there any hints for me to pay extra attention before I place the order? Or should I ask someone to fix it becos i know nothing about electronic / electrical?

[team_v]

Hi,

Before I order the RNS 510, I just want to make sure is it that simple I can replace it by myself. I found some people they need re-coding or VCDS, VAGcom, can-bus issue, etc.... on the other hand some people take only 15 -30 minutes to replace it.

My Tig is originally equipped with MDI and bluetooth. Is there any hints for me to pay extra attention before I place the order? Or should I ask someone to fix it becos i know nothing about electronic / electrical?

There is a guide to replace the RCD310 with an RNS510.

It is pretty simple except you will need a hex head screwdriver with a t20 bit to get the unit out (from memory)

I never had MDI or blutooth so i can't help with that.




Here is the guide: http://jamaicastore.com/images/RNS_5...tion_Guide.pdf

[Explorer2]

Thanks! team_v!

I am still struggling with the compatibility of existing bluetooth, MDI and AUX and MDF. I am still doing some research on it.

[aussietig]

FWIW, my DIY installation was plug and play, with no need for VCDS re-coding.

MDI, MFD and steering wheel buttons worked fine and unchanged!

However ... whilst we have the same MY car, I upgraded from a RCD 510 and don't have bluetooth.

[Explorer2]

Thanks aussietig!

I will give it a try later!

[Ryan_R]

If you don't have VCDS, you will likely find that the unit works fine, but you won't get the Navigation screen on your MFI/MFD (which shows compass and navigation instructions). When I installed mine, all the steering wheel buttons worked for changing volume/skipping, etc (wasn't expecting it to work based on what I had read).

If you need to get a T20/T25 screwdriver, go for a magnetized one (or buy a magnetizer that'll add the feature to your current screwdriver) - last thing you want is to drop a screw inside the dash only to have it rattle when you drive).



Also remember, when you first install the RNS510, the maps might go all haywire when you first drive - don't panic, this is normal and it should correct itself as you continue driving for 10-20 minutes.

[Explorer2]

If you don't have VCDS, you will likely find that the unit works fine, but you won't get the Navigation screen on your MFI/MFD (which shows compass and navigation instructions). When I installed mine, all the steering wheel buttons worked for changing volume/skipping, etc (wasn't expecting it to work based on what I had read).

If you need to get a T20/T25 screwdriver, go for a magnetized one (or buy a magnetizer that'll add the feature to your current screwdriver) - last thing you want is to drop a screw inside the dash only to have it rattle when you drive).



Also remember, when you first install the RNS510, the maps might go all haywire when you first drive - don't panic, this is normal and it should correct itself as you continue driving for 10-20 minutes.

Thanks for advice! I tried to search the RNS 510 from ebay and they are usually 2nd hand or used or disassembled from other cars. Should I buy a brand new or the new ver. F from Poland (only equipped with European map at the moment). Any suggestion to which seller?

[Ryan_R]

Did a quick search on Ebay - best I could find (price + map version) is here:

Volkswagen Navigation System RNS 510 V4 MAPS vw rns510 | eBay

Don't worry if a unit doesn't have Video in Motion (VIM) enabled, you can do it yourself for free by burning a CD that updates the software.

[Explorer2]

Did a quick search on Ebay - best I could find (price + map version) is here:

Volkswagen Navigation System RNS 510 V4 MAPS vw rns510 | eBay

Don't worry if a unit doesn't have Video in Motion (VIM) enabled, you can do it yourself for free by burning a CD that updates the software.

Thanks! Buddy Ryan! I have asked the seller whether it is LED version. If so, I will probably order it! Thanks again!

[langers_sydney]

Thanks! Buddy Ryan! I have asked the seller whether it is LED version. If so, I will probably order it! Thanks again!

Hey mate. Would you mind letting me know if it is LED please. If so i'll wait for the next one and grab one as well.

Cheers
LS

[aussietig]

LED started rolling out on late C units.

So if it's a legit F unit, then should be a "given"!

[Explorer2]

Hey mate. Would you mind letting me know if it is LED please. If so i'll wait for the next one and grab one as well.

Cheers
LS

This is not LED version but the seller has LED version costing ~950.

[roccoizm]

Bump - hoping someone could reply to my query. I have purchased and installed a rns510 1T0035680F SW: 3970 and 9W7 bluetooth kit 7P6035730F. All working fine however I don't get Nav directions or phone book on mfi/mfd. I'm driving a Tiguan 2011/03 build.

[Ryan_R]

Sounds like you haven't made the required coding changes using VCDS.

http://www.vwwatercooled.org.au/forums/f112/official-vww-vcds-tweak-library-50749.html#post572596

[roccoizm]

Coding corrected the problem. Thanks for the tip.

Another from left field. My rns510 version F says it has a 18.85gb hdd. The seller from eBay advised me to format the drive. Any ideas? I am hoping fw will not be lost?