Above Forum Ad

Collapse

Announcement

Collapse
No announcement yet.

Memoscan U600 fault reader

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • #16
    Originally posted by Transporter View Post
    I would say that the V-checker well maybe what you're after. But, the VCDS and the small secondhand netbook in the glovebox would be better, though more expensive option.

    Try V-checker and let us know.
    Thanks!

    Comment


    • #17
      Can anybody kindly confirm what onboard diagmostic protocol a 2008 built Australian delivered VW Multivan TDI is? I have trawled the web and it is not clear in my mind. K+ and Canbus protocols are mentioned regarding VW's. Then there is The ADR 79/01 (Vehicle Standard (Australian Design Rule 79/01 – Emission Control for Light Vehicles 2005) standard; the Australian equivalent of OBD-II or The EOBD (European On Board Diagnostics) regulations; the European equivalent of OBD-II.

      KWP2000 is also mentioned.

      How does one verify which protocol a VW Austalian delivered model is operating on?

      Regards, Scott
      Last edited by Silver Caravelle; 21-08-2012, 09:56 AM. Reason: edit.

      Comment


      • #18
        Using the Autel on my 04 comes up with "KWP2000"
        Steve
        04 T5

        Comment


        • #19
          Steve, Thanks for this. I wonder if it is Canbus for a 2008 model? The sage with Topbuy continues to obtain a replacement or a refund before I aim for an alternative fault reader. Best regards,Scott

          Comment


          • #20
            Hi Guys,

            V-checker VAG Pro V202 arrived yesterday. I plugged it in and it at leasts recognises the vehicle's computer. Will have a play with it on the weekend and unplug a few things to see if it picks up the fault codes. Interesting it comes up with KWP2000 as the protocol (not Canbus) even for a 2008 TDI vehicle..

            Regards,

            Scott

            Comment

            Working...
            X