VAG-COM scanning, who can help

[HawkDubber]

Hi all,

about to take delivery of a 2010 Polo GTI. Would the unit below be OK to do the required programming when I install a RNS510 and other bits? I'm guessing this is a cheap Chinese rip off of the Ross Tech unit. For $35 shipped it seems worth the risk but any thoughts?

VAG-COM 10.6 VAG 106 VAG 10.6 VCDS HEX CAN OBD2 DIAGNOSTIC CA...USD 33.17/Piece Wholesale Price at DHgate.com

Apparently these cables do work but have limited functionality compared with the ross-tech cable. Im willing to take a punt for a tenth of the price.

[m3103]

Just got my rns510 and need a couple codes to fix a few little things.
I'm in the bayside area (Vic) and would greatly appreciate any help at all. Slab or whatever else for the assistance.

[johnw]

I've got a Ross Tech Hex-Can-USB, suitable for all cars I believe.

Can help anyone willing to meet in Chadstone or Mulgrave area with a scan/log/code clear etc for free [I don't drink ]

I've only used it for diagnostics and logging, haven't done any modding with the cable [RNS setting, changing adaptations, key program etc] but you're more than welcome to if you know what you're doing

Just PM me

[Back Door Shenanigans.]

I've got a Ross Tech Hex-Can-USB, suitable for all cars I believe.

Can help anyone willing to meet in Chadstone or Mulgrave area with a scan/log/code clear etc for free [I don't drink ]

I've only used it for diagnostics and logging, haven't done any modding with the cable [RNS setting, changing adaptations, key program etc] but you're more than welcome to if you know what you're doing

Just PM me

I just obtained his cable so if anyone in perth needs a scan im here to help.

[johnw]

Good to hear you got it ok.

But just a small correction, its the KII USB that you bought, this one is what I got now.

Cheers

Sent from my X10i using Tapatalk

[aVex]

I've got a genuine Ross-Tech Micro-CAN cable.

I live in Docklands, Victoria and if you're in need of assistance let me know.

[Enjayjay]

Help - PTT for 937 coding translation or code help?

Hi Guys,

Anyone able to assist in translating the coding shown on a few web pages for PTT button on steering wheel for 9w7 bluetooth- dealer doesn't know how to do it and say their system looks different - not used to installing these kits and are pleading ignorant. What do I tell them to change? I see the insturctions - but how does it look or get referenced in their system?

Or failing that - anyone in Canberra want to help me out since its a 5 minute job or days of pain with Lennock Motors?

Thanks in advance...

[ALR36]

Hi guys, just got my 9W7 & fitted to my Passat, anyone have experience & a VCDS could help to sort out coding in Melbourne Richmond or Glen Waverley area?

Thanks in advance

Cheers Tony

[CSR]

I have the USB cable that will work for MKV + cars, live in Melbourne and would be happy to help anyone out. Send me a PM if you need a hand on any coding.

[SamS3]

I can help on Sydney's north shore. I only have an eBay cable though.

[warnabrother]

I'm on the Mornington Peninsula in Melb..
I've got the Hex+Can cable and am happy to help out where I can..

I'm also pretty handy with the spanners (or hammers )

[John]

Hey Guys,
For us 2010-2011 Polo people we need a HEX+CAN interface. I have been trying to use a micro-can with my 2010 Polo GtI 6R and keep on getting error messages(RNS510 and bluetooth kit installed but not coded). Makes sense now.

Has anyone in Brisbane or surrounding areas got a HEX+CAN interface ? I am willing to pay in form of $$$ beer or anything of value for help.

Or has anyone had luck with a micro can??

Cheers and thanks

[Thaiger14]

Hi,

I was after a huge favour with anyone with a vagcom unit in the Sydney area. I have installed an RNS510 into my Jetta and need recoding. Will need the following:

- MFD display for audio and navigation
- DVD region 4 enabled
- Premium menu colors

Will pay between $50-100 for assistance. Your help is apprecitaed

[ltbonline]

My VCDS is on the way to Melbourne Will post once it's here and would like to help members solve the problem cheers

[OzTrekker]

I have a genuine Ross-Tech MicroCAN cable and VCDS.
Happy to be of assistance.
I'm in Kiama, NSW.