VAG-COM scanning, who can help

[shauno]

Hi anyone in sydney North shore or Ryde area have a vagcom or VCDS cable that could help me on MKV?
Will work out something for your time

PM sent, you can borrow my MicroCAN cable

I now have a genuine hex+can cable (rather than an eBay one) so can help in the Chatswood/Lane Cove area. Also work in Brookvale so can arrange round there.

PM sent, would like to borrow your HEX cable

[ricco]

I now have a genuine hex+can cable (rather than an eBay one) so can help in the Chatswood/Lane Cove area. Also work in Brookvale so can arrange round there.

Hi Sam, ive got a T5, just fitted a MFSW and want to try to get it working. Any chance of helping me out? Im in Lindfield, happy to meet up at your convenience.

Rick

[kdog]

I've got a golf mk4 and just wondering who can run a scan for me?? am happy to pay for it, im in the south-east end of melbourne...cheers!

[pepsimax]

If anyone is around the Sydney region, Im from the Sutherland Shire and can help out if someone needs some codes checked or something just PM me

[Ratstylz]

Dealer spec VAS pc in Perth area, VW Audi Skoda Seat

[iigx]

Since nobody seemed to have one, ive now got a Ross-Tech VCDS cable. If anyone needs any polo or other VW programming done let me know

[vvw747]

I think I've posted here before, but I've got a VCDS cable if anyone needs some help

[jaredtomas]

Dealer spec VAS pc in Perth area, VW Audi Skoda Seat

I'm going to need a CAN gateway software updated soon. Can you help?

[makser7]

Hi AdamD,
I need to change and program can bus gateway in my Jetta 2007, can you help me, I am on Adelaide, thank you...

[remigi]

Would like to borrow a cable in Southbank, Melbourne tonight and tomorrow - Anyone willing to lend me a cable? I need to reprogram my new CAN gateway and my eBay cable has failed me. Will return it Wednesday.

Thanks!

[Darks RS]

Anyone in Canberra able to assist with coding post MDI, RVC install? Also wanted to turn on a few features, happy to bring a case for troubles.

[@Racing]

I have a VAGCOM (Ross Tech) cable and would be happy to help out any members who need coding done in the Newcastle/Hunter Valley area.

[yowie]

Hi, I am in inner Brisbane area andlooking for someone who could run a VCDS scan to find out why the '95 Mk3 TDI wont start.
I have checked oil levels and eliminated the battery and turbo-timer, and would be happy to pay or throw a carton at it?

And a rapid update is in order as the problem was the after-market key. I tried the original and its all good, up and running again. Thanks Gigett.

[shane_in_oz]

hi all
Mortdale/Hurstville area need help in coding my door lights I fitted today and also would a mk6 gti have the chirp feature when you turn the alarm on/off?

cheers Shane

[greg32]

What would be helpful is collate people with cables, type of cable, location, contact method(PM probably preferred if not a business) My thought is to edit this post to keep the info valid and not bloat the forum. Cheers Greg.
Member ID..................Location...................... ...Cable type........................ Contact method
Greg32.........................Orange NSW...................Hexcan(Rosstech)............ ...PM