VAG-COM scanning, who can help

[zei20t]

Coming Home/Leaving Home.

To use the fog lights for this function, you need to program the car.

its a good feature IMO!

I had my laptop with me on the cruise, but only had time to do Matti's car. next time ill do some more if anyone wants it done

[Euro Car Upgrades]

We need an INSTALLER IN ACT, CANBERRA
both of the garages mentioned on this forum cannot help - probably to busy doing oil changes
If you know anyone with VW Audi Electronic / Electrical knowledge - get them to ring us 0447 200 200
Support is provided and opportunity to make it a full time job

[romaniac]

hi guys - looking for someone in Melbourne east with a cable that can help for 15mins or so.
Thanks

[li21]

Hi anyone in sydney North shore or Ryde area have a vagcom or VCDS cable that could help me on MKV?
Will work out something for your time

Thanks

[sorcam]

Hi All. I'm hoping for some help. I've got a 2012 Polo GTI and I'm wanting to get a list of all the alarms generated. Such as engine warning, blinker warning etc.

If someone could help in Sydney that would be great.

Thanks heaps..

[scobb]

I've got a genuine Ross Tech Micro-CAN cable in Christchurch NZ, if anyone would like to borrow it. Works perfectly on my other car (a Skoda Octavia Scout), but sadly not on the Polo 6R which only works with the full blown HEX-CAN cable. The genuine Micro-CAN cable is pricey enough, so I don't feel like stumping up another $200-plus for an upgrade. If anyone in my part of the world has the full blown HEX-CAN cable, I'd love to hear from them.

[NVRENUF]

Can help in WA Perth Metro

[Ax0r]

Looking for someone in Sydney (Parramatta area) who can help me diagnose an ABS/ESP warning light on my MkIV.

[daljames]

Hi all, have a genuine VCDS Hex Can cable on the northern beaches/north shore of Sydney if anyone needs it.

[SamS3]

I now have a genuine hex+can cable (rather than an eBay one) so can help in the Chatswood/Lane Cove area. Also work in Brookvale so can arrange round there.

[alexz]

is there anyone out there with a hex+can cable in wollongong? will to send some beer their way... thanks

[michelinmeister]

anyone out there with a cable that will work on a 99 model Seat in fitzroy area in melbourne? I have ebay cable and will work with ABS and airbag modules but not with anything else. Same result when I plug in a second ECU. Would like to see if I can connect with a proper Rosstech dongle before I invest in one. If you have an ebay cable that actually works then would also be interested in trying that. Happy to supply slab or pay a fee. cheers

[Buckets]

anyone out there with a cable that will work on a 99 model Seat in fitzroy area in melbourne? I have ebay cable and will work with ABS and airbag modules but not with anything else. Same result when I plug in a second ECU. Would like to see if I can connect with a proper Rosstech dongle before I invest in one. If you have an ebay cable that actually works then would also be interested in trying that. Happy to supply slab or pay a fee. cheers

PM sent

[en13]

hi, does anyone have VAGCOM in Perth? happy to bring a 6 pack for the favour.. just want to enable some lights and reset service logs.

[michelinmeister]

anyone out there with a cable that will work on a 99 model Seat in fitzroy area in melbourne? I have ebay cable and will work with ABS and airbag modules but not with anything else. Same result when I plug in a second ECU. Would like to see if I can connect with a proper Rosstech dongle before I invest in one. If you have an ebay cable that actually works then would also be interested in trying that. Happy to supply slab or pay a fee. cheers

anyone with a hex+can, kII or even ebay cable that works for them give us a yell