Mk1 16v Project

[Preen59]

Well, here's some pics for you guys on the progress this week..

Fuel line..












Ignition leads with the 90 degree cap..




Just a heads up on running the Saab dizzy cap... Your standard lead ends will not work.. You have to use the plugs like on the 8v. We modified the leads using the MSD lead kit.

[Preen59]

Brake Lines..







Brake light switch..



Wiring... Ugh..






More at a later date..

[Jarred]

looking good so far. All nice and neat, I like it like that!

[velly_16v_cab]

nice work guess...how long are you down for?

[Preen59]

Cheers dudes.

nice work guess...how long are you down for?

Heading back on Monday, mate.

[GoLfMan]

Tim truly is the master of hard line routing and wiring!
Good to see some work getting done.

[Preen59]

Tim truly is the master of hard line routing and wiring!
Good to see some work getting done.

Yeah his handywork goes almost as good as his ute..

Oh, right.. You can't compare it to that, can you?

[Preen59]

We finished the brake lines, fitted the handbrake cables and fitted the engine today...









Some good news.. I found a spot to mount my MSD and coil.. Some bad news.. I'm minus one glove box.. Haha.



Just a couple of random shots while i had the camera...

[Jarred]

good stuff!

Looking good preeny, she gonna be at nats?

[Water Boy]

good stuff!

Looking good preeny, she gonna be at nats?

I thought he was using it to tow the caddy back to Orange!

[Preen59]

I doubt it will be at the Nats, dudes.

[Preen59]

Don't worry, there's still plenty going on here...

First up, Timmy's been hard at it. These are the ONLY pictures he sent me.. The bastard! haha..




Now.. What I got up to.

While I was down at Golfworx Performance, I helped myself to a set of genuine 1976 Bosch headlights from a donor car. They were both immaculate, but very, VERY dirty.

This arvo I went about giving them a refurb..




First up, frames off and give the body a damn good clean with some spray and wipe (this was actually home brand stuff, but its bloody good!)




Then, stick the frame in the sand blaster and clean it right up..




Followed by some etch primer and some matt black paint. Put them back together and...





Pretty happy with how they came up and they should look really nice back in the car when it's done.

One thing I should mention is that I didn't clean the adjuster screw threads. This meant that I could see where the original positions were so that when I put them back together, i could get them damn close to level and they will hopefully only need some minor tweaks to get them pointing straight ahead.

[Jace]

You'll no doubt be needing a few extra digits on the speedo, one of these would be nice next to an OEM Porsche tach.

[Preen59]

You'll no doubt be needing a few extra digits on the speedo, one of these would be nice next to an OEM Porsche tach.

Haha.. Yeah, with the RPM range and gearing it should go off the speedo in 4th with enough road.. haha.

What's that out of? Early 911??

[Spyda]

Looks amazing dude, so inspirational!

How do you go about making thous hard lines?