Above Forum Ad

Collapse

Announcement

Collapse
No announcement yet.

Patch's Car

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Patch's Car

    Well i'm new to the site,but not new to VW's,so here is my latest car in the making.

    Day one of ownership,June 08





    First job was to remove the awfull lights,and fit a black rear view mirror.








    Lost all of those stickers and it looked like this

  • #2
    thats sweet mate

    Comment


    • #3
      That's not half bad! Very different.

      APR Tuned | KW Suspension | INA Engineering | Mocal Oil Control |
      Website: http://www.tprengineering.com
      Email: chris@tprengineering.com

      Comment


      • #4
        Thanks

        Next cam some 312mm front brakes



        Then there was a proplem with wet carpets.
        Got to my mates and we dropped the headlining and checked the sunroof drainage,everything was in order.We knew the carpet had to come out as it was soaked,so disconected the battery and spotted a gromit in the engine bay.It was for the bonnet release cable,on closer inspection some prat had fed the boost guage through the bulkhead and not sealed it.That's the sorce of my proplem them,we ran the boost guage through the fuse box and put the grommit back into place.

        Front seats out,and carpet removed(not as quick as it sounds).






        I ran like this for a few weeks while the carpets were drying out and to make sure the leak was fixed.

        Comment


        • #5
          That's a lotta water!

          APR Tuned | KW Suspension | INA Engineering | Mocal Oil Control |
          Website: http://www.tprengineering.com
          Email: chris@tprengineering.com

          Comment


          • #6
            awesome matey keep cleaning her up!!!!
            bet it stops hard with the big brakes on it
            VW: it aint just a car, its a way of life
            There are few things more satisfying in life than finding a solution to a problem and implementing it
            My Blog: tinkererstales.blogspot.com.au

            Comment


            • #7
              Lol,the first time i hit them i nearly went through the windscreen.

              A few of us went for some rolling shots,these were taken by someone hanging out of a bora(elbows inches from the floor)



              Comment


              • #8
                Not exactly a "Sleeper" is it?hahaha

                APR Tuned | KW Suspension | INA Engineering | Mocal Oil Control |
                Website: http://www.tprengineering.com
                Email: chris@tprengineering.com

                Comment


                • #9
                  Originally posted by Preen59 View Post
                  Not exactly a "Sleeper" is it?hahaha
                  Not back then it wasn't

                  Once i was 100% happy that i solved the water leak i started to put the car back together.




                  While the seats were out i gave them a good clean





                  I bought some R32 clocks that were in a sorry state,so i had to refurb those before fitment.
                  Before


                  During


                  After

                  Comment


                  • #10
                    nice lot of tlc
                    did you polish cluster face to the remove marks?
                    turned out very nice

                    Comment


                    • #11
                      Originally posted by ontarv View Post
                      nice lot of tlc
                      did you polish cluster face to the remove marks?
                      turned out very nice
                      I used 1500grit sandpaper,them polished it up afterwards.Took about an hour to get them in that condition.

                      Comment


                      • #12
                        New clocks fitted





                        Next came an R32 front bumper and i gave the intercooler a lick of black paint.



                        Comment


                        • #13
                          nice i like a stealth intercooler

                          Comment


                          • #14
                            nice tape on the bonnet wish mine was 2door
                            mk4 the mods begin for round 2 hahahha

                            Comment


                            • #15
                              That was a piece of plastic to solve the debadged issue(previous owner).

                              20mm rear spacers and a matt black grill(lost that plastic piece aswell).





                              New boost guage,and rear arb.

                              Comment

                              Working...
                              X