G-8VXWWTRHPN Fuel of a quality compliant with EN 228? - VWWatercooled Australia

Announcement

Collapse
1 of 2 < >

Email Notifications Failing (mostly Telstra)

Hello everyone. Seems there is an issue with Telstra (possible others) blocking email from our server. If you are trying to sign up I would suggest a different email if possible. If you're trying to reset your password and it fails please use the Contact Us page:
2 of 2 < >

Welcome to the new look VWWatercooled

After much work and little sleep there is a new version of the forums running on more powerful and recent hardware as well as an upgraded software platform.

Things are mostly the same, but some things are a little different. We will be learning together, so please post questions (and answers if you've worked things out) in the help thread.

The new forum software is an upgraded version of what came before, it's mostly the same but also a little different. Hopefully easier to use and more stable than before. We are learning together here, so please be patient. If you have questions, please post them here. If you have worked something out and can provide an answer,
See more
See less

Fuel of a quality compliant with EN 228?

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Fuel of a quality compliant with EN 228?

    Hi All,

    Been trying to google what this means to no avail.

    My Scirocco has a PR no. QI4, and in the owner's manual it indicates it should be under VW 502 00, but it also states the following...

    Alternative engine oil specs > Only in the EU, Switzerland, Norway, Japan and Australia (a).

    VW 504 00

    (a) Alternative engine oil specifications may only be used in fixed QI1, QI2, QI3, QI4, and QI7, and only when fuel of a quality compliant with EN 228 (petrol) and EN 590 (diesel), or fuel of an equivalent quality, is available in the particular country.

    It also mentions that engine oils compliant with VW 504 00 and VW 507 00 are therefore unsuitable for use in a large number of markets.

    I can't find any information regarding EN 228 in Australia.

    I tried googling "what does EN 228 mean in octane levels?" and "is EN 228 the same as 98 octane?" but nothing really comes up Australian related.

    Anyone care to explain if EN 228 means for us in Australia?

    I use BP Ultimate (98 octane). Is it as simple to say that this meets the EN 228 quality?

    Cheers,

    Andy
    MY14 Scirocco R, Candy White, DSG, Panoramic Sunroof

  • #2
    EN 228 and EN 590 are European standards for gasoline (petrol) and diesel respectively, as set by the European Committee for Standardization (CEN).

    My understanding is that these standards, once agreed upon, are then legislated by parliament in each EU member state, which then gives these standards authority in their particular country.

    Australia has its own fuel standard for petrol and diesel.

    The links below can be used to compare European and Australian fuel standards:

    EU: Fuels: Diesel and Gasoline - TransportPolicy.net
    Australia: Fuels: Diesel and Gasoline - TransportPolicy.net

    Comment


    • #3
      Thanks for that...

      I did read the transport policy site when I was searching.

      If I read correctly, EN 228 compliant fuel should not have a sulphur rate of more than 10ppm? Although, Aust premium unleaded (i.e. 95 or 98 octane) has up to
      50ppm?

      So does that mean our fuel is not EN 228 compliant, and in actually fact we all should be using VW 502 00 engine oil?

      Cheers,

      Andy
      MY14 Scirocco R, Candy White, DSG, Panoramic Sunroof

      Comment


      • #4
        I observe that when Volkswagen introduced VW oil standard 504.00/507.00 and diesel particulate filters onto the market in 2004/2005, the maximum sulfur content limit for on-road fuel in Europe at the time was 50 ppm.

        Even though sulfur-free fuels (<10 ppm) were becoming commonplace, I imagine the implementation date of Euro 4 emissions and fuel standards wasn't something that was lost on Volkswagen.

        Thus, I interpret that as 504/507 lubricants being acceptable to use with 50 ppm fuels, though perhaps on the condition that the oil change interval is set at a maximum of 15 000 km ("Time and Distance" service regime), as opposed to a possible maximum of 30 000 km (for vehicles on the "LongLife" service regime in Europe).

        Comment


        • #5
          Thanks again for your insight and response (as always)!

          I think I've interpreted it similar to your explanation.

          Fuel and engine oil has really interest me since owning my VW, although blows my mind with the information surrounding all this (sometimes lack of)!

          Your input is always appreciated Diesel_vert.

          Cheers,

          Andy
          MY14 Scirocco R, Candy White, DSG, Panoramic Sunroof

          Comment

          Working...
          X