Above Forum Ad

Collapse

Announcement

Collapse
1 of 2 < >

Email Notifications Failing (mostly Telstra)

Hello everyone. Seems there is an issue with Telstra (possible others) blocking email from our server. If you are trying to sign up I would suggest a different email if possible. If you're trying to reset your password and it fails please use the Contact Us page:
2 of 2 < >

Welcome to the new look VWWatercooled

After much work and little sleep there is a new version of the forums running on more powerful and recent hardware as well as an upgraded software platform.

Things are mostly the same, but some things are a little different. We will be learning together, so please post questions (and answers if you've worked things out) in the help thread.

The new forum software is an upgraded version of what came before, it's mostly the same but also a little different. Hopefully easier to use and more stable than before. We are learning together here, so please be patient. If you have questions, please post them here. If you have worked something out and can provide an answer,
See more
See less

Running in advice

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • #16
    the 60-80 thing - in an Octavia you'd do that in 2nd or 3rd. 5th or 6th would lug the engine.

    I used to buy big stationary diesels (V16 & V24 compressors). Same deal as Ozko - they'd put them out on the line after acceptance testing and run them under load for an 8 - 16 hour shift.
    carandimage The place where Off-Topic is On-Topic
    I used to think I was anal-retentive until I started getting involved in car forums

    Comment


    • #17
      It needs to be 100% up to temp (not just the gauge...) but drive it hard enough to bed the rings with good pressure behind
      this is exactly what the manufactures do, I remember doing a tour of Ford in 1987 and have seen mega factories (just like everyone else) and it is good enough for every one from Tata to Ferrari

      Dont use max revs but max load, although remember lugging the motor will damage the bearings (as opposed to the rings)

      Comment


      • #18
        I think the Octavia RS is similar to my Golf GTi engine. I took delivery on 15th and asked 2 different people in the dealership (sales and service guys) about running the car in. Both said go for it straight away (hence getting the 2nd opinion) as the car is delivered already run in. Spent Saturday going for a run through the Dandenong hills here in Melbourne slowly working up to 5500-6000 rpm during the trip. Sod waiting a couple of thousand km, had the time of my life!
        Will let you know if this has been detrimental further down the track but intend to keep loading the car on some weekend day trips in between runs to work during the week.
        2007 Polo GTi std
        1991 Nissan Pulsar GTi-R
        2007 Fiesta ST150 mountune kit

        Comment


        • #19
          This is what I did in my rebuilt EP71 engine.
          Never had a problem & went like stink!
          Most will disagree with the article but I thought Id have a go & see what I ended up with.
          All good!


          Break In Secrets--How To Break In New Motorcycle and Car Engines For More Power

          Comment


          • #20
            Seems like the conclusion is to drive it normally... thanks guys.

            As it turns out the question of whether running in on a road trip was a moot point... I leave Saturday and car is only arriving for PD today or tomorrow. Dealer has lent me a demonstrator Scout 135TDI for the ~2000km road trip

            Nick
            2007 Golf 2.0 TDI Comfortline DSG/ESP
            MY15.5 Octavia RS Wagon 135TDI, Race Blue, 18" Black Pack, Tech Pack, Comfort Pack, Auto Tailgate, Panoramic Sunroof

            Comment


            • #21
              What a legend. The Scout is fantastic over long distances (though I'm biased...)


              Sent from my iPhone using Tapatalk

              Comment

              Working...
              X