Show us yer OPS mate

[wfdTamar]

What does your OPS look like on your screen? Particularly the colours?

I have a 2008 Octavia. I have a VW RNS510 in my car and the possibility of a Skoda one (which is one hardware model older). I've put in factory parking sensors.

I'm getting different pictures on the screen with the OPS. I'm not sure if it's due to the different model numbers of the RNS510 (H60 & H61), or just a cosmetic difference between VW and Skoda displays.

With the VW RNS510 I get pictures something like this (but 4 segments each end of the car):






But with the Skoda unit they look like this:

[NOO63N]

Very interested in this if someone could chime in. Especially as I'm looking to retrofit this in the very near future!

To OP: Was it hard to fit?

Sent from my GT-N7100 using Tapatalk

[readerr0r]

The Skoda columbus has different lights and a different skin compared to the RNS510. The buttons on the columbus are green and the rns' are red. More importantly, some of the steering wheel controls don't work 100% on the octavia with the rns, I think its volume.

I know this because I actually put the RNS510 from my written off Polo into my sisters Octavia. I was able to get the steering wheel controls and skin to work on it thanks to Audiupgrades which had the special RNS diag tool to trick the firmware to think its a columbus.


So if you have a choice and the columbus isn't tooo old (ie it has the led screen, look for the voice control button top right), I'd pick that!

[wfdTamar]

Not that hard to get the bumpers off. Very tricky getting neat holes - I did ok, but it doesn't look factory. I used a forstner spade bit. Running the wires is time consuming. There's a spot down behind the battery where you can pierce a rubber grommet to get through the firewall.

A rear camera may be a better option. The sensors are handy, but if I had to choose one or the other, I'd go with the camera - or both, which I'll soon have.

Yes, the Skoda Columbus has pale green lights, the VW version has red. Also the splash screen when you start the unit is branded for each car (you can customise that, which I tried a while ago, but it didn't work).

I actually had the steering wheel buttons working fine with the VW unit in my Skoda, but with the Skoda unit in the Skoda they don't work. This makes me think it is a coding issue. Not sure why it stopped when I put the Skoda unit in. Maybe it needs to be coded again the same way just because it sees a new radio and isn't sure what it is.

The only on screen difference I could see was the OPS display (as described above), so I'd really like if people with a Skoda could say what there's looks like and what vintage their car or Columbus is. Also possibly the colour scheme is green in the Skoda unit - I think it was reddish brown in the VW.

[dArK5HaD0w]

What does your OPS look like on your screen?
[ATTACH=CONFIG]8814[/ATTACH]

mine looks like this.
factory fitted front & rear sensors.

[wfdTamar]

Thanks, that's what I need to know. So it's just a cosmetic difference between VW and Skoda (I actually prefer the look of the VW one though).

[k_rider]

mine looks like this.
factory fitted front & rear sensors.

+1 Yep, same

[wfdTamar]

Tried recoding for an RNS, but the steering wheel buttons don't work. Very odd - it's a Skoda unit in a Skoda!

[OctaviaKid]

Where did you get the sensors from?

[readerr0r]

Tried recoding for an RNS, but the steering wheel buttons don't work. Very odd - it's a Skoda unit in a Skoda!

If its facelift octy it probably needs the shortpress steering wheel coding ticked

[wfdTamar]

Pre facelift 2008. Tried with the short press ticked and not ticked (that's in the Navigation section).

Got the kit from carsystems.pl

[VRSJas]

Hi here is mine with a reverse camera. I get the bars that change colour front and back. It is an aftermarket head unit with aftermarket camera integrated into the number plate light.

[wfdTamar]

I've just got a mount for a factory camera that just holds the camera by itself through a hole I'll need to cut. I bought the type that is integrated into the boot catch (the Tiguan version), but couldn't instal it because the boot catch connector was not the same as the Octavia and didn't come with a 'cup' on the back to hold it. Also not a neat fit once the hole is enlarged. The mount I have for the camera only requires a small hole and I can put it anywhere under the lip there is room. I took the camera out of the catch. Can't wait to put it in because vision out the back is limited.

[wfdTamar]

Here's the fix:

Note! Skoda owners

Extract files PQTABLE and SKTABLE from image (use magiciso or ultraiso). Files can be found from path: \VUCI\B101\RNSMIDEC\PROG
Switch the filenames by just renaming SKTABLE to PQTABLE and vice versa
Overwrite the renamed files back to image and save the image. Burn this image to DVD or CD.
Load or reload the Firmware to your RNS-510 using the steps below.
Voilá… buttons are back!

[NOO63N]

Good result!

Sent from my GT-N7100 using Tapatalk