A3. 8L. Black on black. On black.

[eltonking]

planning on taking off my valve cover to paint it and turning it in to something like this...

http://tunergarage.net/photo/main.php?g2_view=core.DownloadItem&g2_itemId=1259&g2_serialNumber=2

question, when putting it back on do i need to change over the gasket as well? and is it as easy as just unbolting it, taking it off to paint it etc then bolting it back on...?

cheers

[GoLfMan]

planning on taking off my valve cover to paint it and turning it in to something like this...

http://tunergarage.net/photo/main.php?g2_view=core.DownloadItem&g2_itemId=1259&g2_serialNumber=2

question, when putting it back on do i need to change over the gasket as well? and is it as easy as just unbolting it, taking it off to paint it etc then bolting it back on...?

cheers

It should have a re-usable gasket on it, so in that case, yes it'll be as easy as taking it off, painting it and putting it back on

unless 20v's have some sort of voodoo attaching their rocker covers that is

[Bflat]

unless 20v's have some sort of voodoo attaching their rocker covers that is

I wouldn't be surprised if they did haha

[eltonking]

rear seats and spare wheel out, red tinted tail lights in as well as steering column boost gauge installed. slowly checking off the list of things to do before GAD.

on the to do list..
-wheels on
-wooden roof rack
-facelift head lights installed
-clean the car

[eltonking]

rear seats and spare wheel out, red tinted tail lights in as well as steering column boost gauge installed. slowly checking off the list of things to do before GAD.

on the to do list..
-wheels on
-wooden roof rack
-facelift head lights installed
-clean the car

only thing to be done now is the wooden rack which is being done tonight - car still needs a good cut and polish for GAD.

[Bflat]

only thing to be done now is the wooden rack which is being done tonight - car still needs a good cut and polish for gad.

yeahbuddy!

[Bflat]

only thing to be done now is the wooden rack which is being done tonight - car still needs a good cut and polish for gad.

yeahbuddy!

[eltonking]

and as of half an hour ago - rack is complete and on the car

[eltonking]

[Water Boy]

I <3 this A3.

[theOctopus]

Think I saw you on glen eira Rd yesterday. Looks awesome if it was

[eltonking]

I <3 this A3.

i <3 you.

Think I saw you on glen eira Rd yesterday. Looks awesome if it was

and yeah you probably did i was down at hawk and hunter grabbing a coffee ~12-2pm?


will be getting the camber shims on and taking a dremel to the inside of the rear guards to stop the rubbing and get this baby sitting where it should! (low-er)
also chasing some 215/40/18s for the rears! hook a brother up!

and rubbing on the swaybar is stopping me from going lower up front - should i be removing it, getting extended drop links or just undo it for the time being...?

cheers guys

[theOctopus]

i &lt;3 you.



and yeah you probably did i was down at hawk and hunter grabbing a coffee ~12-2pm?


will be getting the camber shims on and taking a dremel to the inside of the rear guards to stop the rubbing and get this baby sitting where it should! (low-er)
also chasing some 215/40/18s for the rears! hook a brother up!

and rubbing on the swaybar is stopping me from going lower up front - should i be removing it, getting extended drop links or just undo it for the time being...?

cheers guys

Yeah it was you then, I saw you from above while having a smoke on my work balcony and the racks really stood out, then I saw the fatness of your rims, nice work

[Stiggy_21]

the wheels look golden

[bootheman]

Are you located in Brighton?
New rims look great


Sent from my iPad using Tapatalk HD