Tweet
Hi everyone, I'm new here but not new to VW. I own a Polo Gti chipped/downpipe/Bentley side mount IC. Was fortunate enough to work at dealer for 2 years when we were dual franchise so I know and love our products.
1 of 2
Email Notifications Failing (mostly Telstra)
Hello everyone. Seems there is an issue with Telstra (possible others) blocking email from our server. If you are trying to sign up I would suggest a different email if possible. If you're trying to reset your password and it fails please use the Contact Us page:
2 of 2
Welcome to the new look VWWatercooled
After much work and little sleep there is a new version of the forums running on more powerful and recent hardware as well as an upgraded software platform.
Things are mostly the same, but some things are a little different. We will be learning together, so please post questions (and answers if you've worked things out) in the help thread.
Things are mostly the same, but some things are a little different. We will be learning together, so please post questions (and answers if you've worked things out) in the help thread.
See more
See less
-
Joe Chu -
Welcome to the forum, Joe. Hope you can find any info you need from here and that you join in the social side. Enjoy your dub ...
Dave
-
Welcome to VWW.
What does this Bentley IC look like?Comment
-
Same as OEM but is around 30cm thicker, they retail for 700 around 550 trade. I'm guessing it's similar to old RS4?Joe ChuComment
-
That wouldn't be smokin' joe chu would it? It's Simon from Hurstville RC Track Welcome bruzz 
Last edited by Pullstarter; 15-11-2008, 12:57 PM.2008 VRS Wagon. Yellow, very yellow!
Forever blowing bubbles.Comment
-
Hey man, welcome to the forum.Originally posted by Joe Chu View Post
Hate to sound nit picky, but was that 30cm or 30mm...I have been looking at side mount I/C's for my car, and I like the sound of what you have done. Was it hard to fit into the stock position on the Polo?
Ryan
"If can't get behind your troops, feel free to stand in front of them..."Comment
-
It was quite straight forward fit, only had to remove RH wheel and arch liner, but I had to use a different inlet and outlet hose as the diametre was the same as the throttle body, Also had to make up some extenders to bolt onto IC so I could use original mounting points on car. The end tanks are slightly larger. I don't use the Polo during the week so I can't tell you if it suffers from heat soak, most of my driving is done at night anyway. I fitted a temp probe off my fluke meter and saw temps as low as 23degs registered while driving, so my guess is it's working. Vehicle hasn't been dynoed so I can't give you a comparison for APR/Forge IC. If you like it stealth I think side mount is the only option, I still think a front mount would be better but I'm a bit strapped for cash at the moment.Joe ChuComment
Comment