Wheels Work XD9's - 18x9 +30 - 5x100PCD!

[Jace]

Hi guys

I have a brand new (still in boxes) set of Work XD9 in gunmetal. Specifications are as follows:

PCD: 5x100 (for Subarus)
Size: 18x9
Offset: +30

I purchased these in anticipation of buying either Liberty GT / 03 STI. But I have since purchased a different car and these are no longer needed





Price: $1500

They're in Sydney. Seeing as how they're one of the best looking modern wheels I figured I'd post these here.
Are they too big for everything with a 5x100PCD? I'm sort of picturing a stanced MK4 GTI with these wheels...

Um, PM me and I'll PM the guy, as it's from a private forum.

[Driven Threads]

Hmmm....tasty. So tempting given the price. If they were staggered with 18X8's at the front I would be all over these. However running 9's at the front is going to cause some issues?

[GoLfMan]

Hmmm....tasty. So tempting given the price. If they were staggered with 18X8's at the front I would be all over these. However running 9's at the front is going to cause some issues?

depends on the offsets matey

[qsilverza]

What's the consensus as to whether these would fit a mkiv ok ?

[TazzyVR6]

What's the consensus as to whether these would fit a mkiv ok ?

I second this!!!

[Jace]

Sure. Assuming you're happy to roll guards and maybe purchase spacers.
Anything can be made to fit anything, with enough time/money.

[GoLfMan]

someone get some balls and buy these!

wheels can be made to fit, who cares if they have a bit of poke!

Google "wheel offset calculator" and punch in the numbers to find out for yourselves if they'll fit

[gareth_oau]

Wheel Offset Calculator

they look great, but i understand they will rub on the front of my S3

[dainese]

someone get some balls and buy these!

wheels can be made to fit, who cares if they have a bit of poke!

Google "wheel offset calculator" and punch in the numbers to find out for yourselves if they'll fit

yeah, ive been eyeing these off. but not sure on the mkiv. and i think these will be tucked in, won't they? ie, we will need spacers?

[dainese]

ah, yes, but 9"....

hmmmm

[Driven Threads]

ah, yes, but 9"....

hmmmm

Agree- I want them- but will they fit...that is the question? Plus I have not seen any mk4 running 9inch at the front.

[dainese]

Agree- I want them- but will they fit...that is the question? Plus I have not seen any mk4 running 9inch at the front.

nah, me neither. i think at this point - jsut get them.!

worry about it later.

run a narrower tyre, roll guards. vortex members, tend to have 8.5 out front. can't be that far off. as long as you don't lower it.

[DUB 20V]

i like the way people say "get some balls and buy these" while the guys who say it dont buy jack all for there cars., hot wheels tho/.

[TazzyVR6]

I put them in the wheel offset calculator and compared to my 17x7.5 et38 bora sports: 11mm less inner clearance behind spokes, 27mm more poke!!! Logic says if they are 32.5mm wider than my 7.5" then they will also be (32.5-27mm) 5.5mm wider on the inside edge as well? So there's all sorts of potential for rubbing...

[dylan8]

8.5 on a spring and shock combo will fill up the front of a MK4. COULD be made to fit with some serious guard rolling though? go get a tape and measure from your shock to the guard.