NSW mk3 golf rear calliper slider pins or caliper carriers

[Special Air Service]

looking for at least 2 rear caliper slider pins and boots for the rear of my mk3 golf.

mine where seized in the caliper and have damaged them trying to free them up.

have got replacement calipers but did not come with the carriers or the pins, so I need at a minimum 2 pins and 2 dust boots to get me going again.

will need to have them posted to me.

Thanks
Brendan

[heysie]

Can you clarify what model mk3?
different models have different sized brakes.

[HaydEn]

All the same on the rear of mk3's. Disc setup that is

[Special Air Service]

yes i am led to believe that all mk3 rear disc brakes are interchangeable.

mine is a '94 GL 2.0L

and still need them

[Special Air Service]

Still looking for the correct carrier and pins......had a set arrived today but, they aren't the right ones


here's the pics of what I need

they are about 70mm long and about 8.4 mm in diameter, one looks like it has 3 small flat sections on the pin and the other steps down in diameter 3 times












Boot has Girling 32320498 on it














This is my caliper in case you need to see that as well, I don't need a caliper, but will take one if I have to so I can get what I need